Wedge House Woonhuis deur Kiyoshi Sugimoto

Die ontwerp Wedge House Woonhuis deur Kiyoshi Sugimoto is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2025 A' Design Award in Brons in die Argitektuur-, Gebou- en Struktuurontwerp-kompetisiekategorie.

BronsArgitektuur· 2025

Wedge House Woonhuis

deur Kiyoshi Sugimoto

Kliënt: Masato Ikuta

Wenner van die A' Design Award in Brons in die Argitektuur-kategorie

12,587

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #162815

Besoek Webwerf Bekyk by A' Design Award Persverklaring Toekenningskenteken

Kleure

Die Ontwerp

Oor Wedge House Woonhuis

Wedge House is 'n drieverdieping-woning gebou op 'n smal terrein met 'n steil helling in Ikeda-stad, Japan. Die wigvormige dwarsdeursnee plaas die grootste vloer bo-op en die kleinste vloer onder die grond, sodat geen bykomende krag op 'n ou keermuur toegepas word nie. Die twee boonste verdiepings is van hout gemaak en die kelder is van gewapende beton. Die oostelike en westelike mure is afgewerk met silwerbedekte staalplate wat die kraagvloer ondersteun en die uitsig na die suide omraam. Die woonarea op die tweede verdieping open na 'n terras met 'n wye uitsig.

Die Erkenning

Oor die A' Design Award in Brons

Wedge House Woonhuis is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat Wedge House Woonhuis 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. Wedge House Woonhuis bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe: The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
Afmetings & Verpakking: Total floor area 111.16㎡　Width 5560mm x Depth 11000mm x Height 10190mm
Etikette: Slopingland structure protruding structure wedge Basement mountainside
Produksietegnologie: The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
Ontwerpuitdaging: Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
Navorsing: Research on stable structures with protruding shapes in wooden buildings
Inspirasie: The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
Projekduur: Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
Bedryfsvloei: A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
Spanlede: KIYOSHI SUGIMOTO
Beeldkrediete: All photos and videos Hirofumi Imanishi