Little Kong Lamp deur RUI Design & Above Lights

Die ontwerp Little Kong Lamp deur RUI Design & Above Lights is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2020 A' Design Award in Silwer in die Beligtingsprodukte en -toebehore Ontwerp-kompetisiekategorie.

SilwerBeligting· 2020

Little Kong Lamp

deur RUI Design & Above Lights

Kliënt: RUI Design & Above Lights

Wenner van die A' Design Award in Silwer in die Beligting-kategorie

48,492

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #98656

Besoek Webwerf Bekyk by A' Design Award Persverklaring Toekenningskenteken

Kleure

Die Ontwerp

Oor Little Kong Lamp

Little Kong is 'n reeks omgevingslampe wat Oosterse filosofie bevat. Oosterse estetika gee baie aandag aan die verhouding tussen virtuele en werklike, vol en leeg. Deur die LED's subtiel in die metaalpaal te verberg, verseker dit nie net die leegheid en suiwerheid van die lampskerm nie, maar onderskei ook Kong van ander lampe. Ontwerpers het die uitvoerbare kunswerk uitgevind na meer as 30 keer eksperimente om die lig en verskillende teksture perfek aan te bied, wat 'n ongelooflike beligtingservaring moontlik maak. Die basis ondersteun draadlose laai en het 'n USB-poort. Dit kan aan- of afgeskakel word deur net met die hand te waai.

Die Erkenning

Oor die A' Design Award in Silwer

Little Kong Lamp is 'n wenner van die A' Design Award in Silwer, 'n buitengewoon prestigieuse erkenning wat toegeken word aan topklas-, pragtige en indrukwekkende ontwerpe. Wenners in Silwer is geweldig briljante en uiters kreatiewe werke wat die uitstaande kundigheid, talent en skerpsinnigheid van hul ontwerpers illustreer. Daar word verwag dat Little Kong Lamp 'n wonderlike vertoonstuk is wat merkwaardig professioneel en diepgaande innoverend is. Hierdie ontwerp wat die A' Design Award in Silwer gewen het, is 'n hoogs noemenswaardige, bewonderde uitvinding wat die grense van kuns, wetenskap, ontwerp en tegnologie bevoordeel en uitbrei. Little Kong Lamp is 'n wyd beny skepping wat begeertes oproep, positiewe gevoelens bring en verbasing en verwondering wek.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe: Little Kong is a series of ambient lamps that contains oriental philosophy. Oriental aesthetics pays great attention to the relationship between virtual and actual, full and empty. Hiding the LEDs subtly into the metal pole not only ensures the empty and purity of the lampshade but also distinguishes Kong from other lamps. Designers found out the feasible craft after more than 30 times experiments to present the light and various texture perfectly, which enables amazing lighting experience. The base has a USB port and supports wireless charging also. Besides, it is easy to turn on or off the light by waving your hands on the top of the pole.
Afmetings & Verpakking: Specifications
Name: Little Kong
Model: D160-W
Weight: 880g
Color: white
Dimensions: (l, w, h in mm) 180*180*340
Packaging dimensions: (l, w, h in mm) 226*226*382
Color temperature range: 2650-5250K
Luminous flux: 380lm
Brightness range: 1%-100%
Color rendering index: Ra>90
Input power: 24W (LED 7W / wireless charging 10W / USB 5W)
Adapter rated parameters: 100-240V 50/60Hz
Rated current: 1A
Wireless charger: Mobile device compatible with Qi
charging standard (Qi1.2.4 EPP compliant)
Output voltage Max 9V
Output current Max 1A
USB output: 5V1A
Service life: about 25,000 hours
Package Content
Lamp
Power Supply Cable
Etikette: Light, table Light, Little Kong, Wireless Charger Light, ambient light, bedside lamp
Produksietegnologie: Little Kong is with compact size and structure. The lampshade adopts advanced PC hot bending process, which needs very high precision requirement to make the shape well. Besides, the texture of the surface is a special paint to ensure uniform and smooth light-guide. The body part is made of aluminum alloy metal material, with surface spraying treatment. The minimal tolerances of AL allows for high precision.
Ontwerpuitdaging: 1. Acrylic lampshade molding process
2. Trial production of nanometer light conducting materials
3. Infrared sensor sensitivity and noise suppression
Navorsing: The design research in the design process of Little Kong is mainly the exploration experiment of hot bending forming technology of light guide plate. In the past, light guide plate is basically used for panel lamp, without hot bending, and the hot bending of this specific form needs special design fixture, and easy to lead to high lmp shade defect rate. Through dozens of temperature adjustment and fixture optimization, we finally improved the parts yield rate to more than 90%, the hot bending cost is only 20% of that of similar European lamps, so that the directional curved surface of light guide plate becomes possible, in the development history of light guide plate has epoch-making significance.
Inspirasie: Inspired from oriental aesthetics which pays great attention to the relationship between virtual and real, ambience and penetration.In the past, desk lamps usually contain bulbs and lampshades. Kong's greatest feature is that it skillfully hides LED beads in metal brackets to ensure the Empty and Purity inside the lampshade. Must say the creative application of light guide plate(LGP) plays a crucial role in the design of Kong. Before, the LGP was mainly used in panel light, but this time, we adopted it creatively on table light, floor light and so on. Its semi-permeable effect is very subtly replace the traditional fabric or glass lampshade. Besides, it can perfectly present patterns or textures in a three-dimensional way. Also make it possible for users to customize DIY patterns.
Projekduur: Little Kong project started on May, 2018, Shenzhen,China. It took almost 6 months from the design concepts to mold and another 6 months from mold completion to stable mass production. We took a series of Little Kong prototypes to extend Hong Kong Lighting Fair on Octorber,2018. It won great rave reviews. And then, the mass production was luanched again on Hong Kong Lighting Fari on October, 2019. It was a great success again. Till now, more than 10,000 pieces of Little Kong have been delivered to users and bring them great joy and convienience.
Bedryfsvloei: 1 ) Connect the power supply cable.
2 ) Turn the lamp on by hovering your hand over the lamp shade
3 ) Color temperature / Brightness
· Use the color temperature key to choose one out of 5 light colors.
· Use the brightness touch key to chose one out of 5 brightness levels.
· Touch these two keys at the same time,and the light will turn off.
· When the light is turn off,touch any of the two keys and the light turns on.
4 ) Wireless charging
Place your wireless charge compatible phone onto the glass of the wireless
charging pad to start charging your phone.
5 ) Charge a second device
Plug a charging cable into the USB-charging port to charge a device.
It is possible to charge one device wirelessly and a second device via cable
simultaneously
Patente: Europen union intellectual
Property office
Certificate of registration
No 006266995-0001 26/02/2019
Peng Guogang
73 SHENZHEN ABOVE LIGHTS CO. LTD
2nd Floor, No.5 Factory, Tongfuyu Industrial City Xili,
Nanshan, Shenzhen
Guangdong 518000
Republica poular de China
Europen union intellectual
property office
Certificate of registration
No 006266995-0002
26/02/2019
Peng Guogang
73 Shenzhen Above Lights Co. LTD
2nd Floor, No.5 Factory, Tongfuyu Industrial City Xili,
Nanshan, Shenzhen
Guangdong 518000
Republica prodular de china
No 006266995-0003 26/02/2019

Japan 110000523 　
Shenzhen Ａbove Lights Co., Ltd.
29th, Nov. 2019
Spanlede: Designer Director: He Qixing
Mechanical Director: Long Xiaotong
Electronic Director: Pengguogang
Brand Director: Wang Yan
Creative Director: Zheng Hao
Electronic Engineer: You Zhifu