Pure Infinity ፔንዳንት በ Bettina Gomez-Latus

Pure Infinity ፔንዳንት በ Bettina Gomez-Latus የተሠራ ሲሆን በ የጌጣጌጥ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2020 A' Design Award የብር ሽልማት አሸናፊ ነው።

ብርጌጣጌጥ· 2020

Pure Infinity ፔንዳንት

በ Bettina Gomez-Latus

ደንበኛ: 1Karat - Atelier für Schmuck & Design - Bettina Gomez-Latus

በ ጌጣጌጥ ምድብ ውስጥ የ A' Design Award የብር ሽልማት አሸናፊ

47,564

የተረጋገጠ የሽልማት አሸናፊ

ለ #102897 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Pure Infinity ፔንዳንት

ፔንዳንቱ ከ18ኬ ቀይ ወርቅ እና 92.14 ካራት ቶፓዝ የተሰራ ነው። የከበረ ድንጋይ ማስቀመጫው እና ማንጠልጠያው ከአንድ ሽቦ የተሰሩ ናቸው። ሽቦው ከጠባብ ወደ ሰፊ በማለቂያ ለሌለው ዑደት ውስጥ በመገናኛ ነጥብ ሳይነካካ ይሄዳል። የፔንዳንቱ መጫኛ በዝንባሌ ነው፣ ይሁን እንጂ ይህ ጌጡ ወደ ፊት ወይም ወደ ኋላ ሳይደፋ በሰንሰለት ላይ በቀጥታ እንዲንጠለጠል ያስችለዋል።

እውቅናው

ስለ A' Design Award የብር ሽልማት

Pure Infinity ፔንዳንት የA' Design Award የብር ሽልማት አሸናፊ ነው፤ ይህም ለምርጥ ደረጃ፣ ውብ እና አስደናቂ ዲዛይኖች የሚሰጥ ያልተለመደ ከፍተኛ ክብር ያለው እውቅና ነው። የብር አሸናፊዎች የዲዛይነሮቻቸውን የላቀ ልምድ፣ ተሰጥኦ እና ጥልቅ ማስተዋል የሚያሳዩ እጅግ ብሩህ እና እጅግ ፈጠራ የተሞላባቸው ሥራዎች ናቸው። Pure Infinity ፔንዳንት እጅግ ሙያዊና ጥልቅ ፈጠራ የተሞላበት አስደናቂ ማሳያ ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብር ሽልማትን ያሸነፈ ዲዛይን የኪነ ጥበብ፣ የሳይንስ፣ የዲዛይን እና የቴክኖሎጂ ድንበሮችን የሚጠቅምና የሚያስፋፋ ትኩረት የሚስብ፣ የሚደነቅ ፈጠራ ነው። Pure Infinity ፔንዳንት ፍላጎትን የሚቀሰቅስ፣ በጎ ስሜት የሚያመጣ እና መደነቅንና መገረምን የሚያቀጣጥል በብዙዎች የሚቀኑበት ፈጠራ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: The pendant became Pure Infinity thanks to the clear, flowing border in red gold that runs around the stone without touching it. The gemstone setting and the loop are made of a single wire and follows an infinite line from narrow to wide. The delicate facet of the topaz is incorporated into the setting thus creating a never-ending impression. The suspension of the pendant is diagonal and allows the pendant to hang straight on a chain without tilting back or forth.
ልኬቶች እና ማሸጊያ: Pendant length: 32,5 mm, width: 56,5 mm, 18K red gold, topaz 92,14 ct. 27,8 mm x 38,4 mm x 13,4 mm.
መለያዎች: Pendant, Topaz, Gold, red gold, Jewelry design, jewelry, gemstones, gold, handmade, endless, infinity
የማምረቻ ቴክኖሎጂ: The topaz of the pendant was scanned and its setting constructed in CAD. It was then plotted in wax and cast in 18K red gold. The setting was finished at the workbench and the gemstone was busted into the setting.
የዲዛይን ተግዳሮት: The main issues while developing the pendant was in maintaining the required tension in the gold and holding the gemstone without closing the setting entirely.
ምርምር: It was necessary to examine how much the gold would move when the gemstone was set in the pendant and whether the stone would break if tension within the setting got too high. Due to the fact that the gemstone is not completely held by the setting, it was important to find out how thick and hard the wire had to be to maintain a certain tension in the gold without the gemstone fracturing during processing.
መነሳሻ: Pure elegance, nothing but the radiance of the gemstone should attract attention. The clear line of metal which serves as a setting, combines purism and functionality into an object that makes the gemstone wearable as a pendant without distracting the viewer from unnecessary details. The symbiosis between metal and stone merges. Only the colour of the red gold and the sky blue of the topaz are complementary and increase their charisma through contrasts.
የፕሮጀክት ጊዜ: The project started in May 2019 and ended in July 2019. The pendant was produced in Steinbach (Taunus), Germany.
የሥራ ሂደት: The pendant can be worn on different precious metal chains or on a leather band. Depending on the wears preference, both sides of the jewel can be worn frontally. Each side of the pendant has its own exklusiv expression.
የምስል ምስጋና: All photos by Achim Kuest