Rebloom ሞዱላራይዝድ የውጪ ፍሬም በ Victor Wu የተሠራ ሲሆን በ ዘላቂ ምርቶች፣ ፕሮጀክቶች እና አረንጓዴ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2023 A' Design Award የብረት ሽልማት አሸናፊ ነው።

ብረትዘላቂ ምርት· 2023

Rebloom ሞዱላራይዝድ የውጪ ፍሬም

በ Victor Wu

ደንበኛ: Leafer Circular Design

በ ዘላቂ ምርት ምድብ ውስጥ የ A' Design Award የብረት ሽልማት አሸናፊ

19,412

የተረጋገጠ የሽልማት አሸናፊ

ለ #143099 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Rebloom ሞዱላራይዝድ የውጪ ፍሬም

የታይዋን የኃይል ማከፋፈያ ክፍሎች ውድ ናቸው እና በአካባቢያዊ ሁኔታዎች ምክንያት በተደጋጋሚ መተካት ያስፈልጋቸዋል. reBloom የተቋረጡ መስቀሎችን በትንሹ ሂደት ወደ ዘላቂ የውጪ ፍሬሞች በመመለስ መፍትሄ ይሰጣል። ሞዱል ዲዛይኑ በቀላሉ ለመላመድ፣ ለማራዘም እና በከፊል ለመተካት ያስችላል፣ ይህም እንደገና ጥቅም ላይ ከመዋሉ በፊት ከፍተኛውን የአካል ክፍል ህይወት ያስገኛል። በ reBloom አማካኝነት አስተማማኝ እና የአየር ሁኔታን የሚቋቋሙ መሠረተ ልማቶችን እያረጋገጡ ብክነትን መቀነስ እና ወጪዎችን መቆጠብ ይችላሉ።

እውቅናው

ስለ A' Design Award የብረት ሽልማት

Rebloom ሞዱላራይዝድ የውጪ ፍሬም የA' Design Award የብረት ሽልማት አሸናፊ ነው፤ ይህም በጥሩ ሁኔታ ከተነደፉ ፈጠራዎች የሚጠበቁትን ሙያዊና ኢንዱስትሪያዊ መስፈርቶች ለሚያሟሉ ጥሩ ዲዛይኖች የሚሰጥ ከፍተኛ ክብር ያለው እውቅና ነው። የብረት አሸናፊዎች የፈጣሪዎቻቸውን ታላቅ ችሎታ፣ ከፍተኛ ልዩ ሙያ፣ የባለሙያ ግንዛቤ እና የፈጠራ አቅም ያሳያሉ። Rebloom ሞዱላራይዝድ የውጪ ፍሬም ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ ተግባራዊና ፈጠራ የተሞላበት ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብረት ሽልማትን ያሸነፈ ዲዛይን የኢንዱስትሪ ምርጥ ልምዶችን ያዋህዳል፤ ከእውቀትና ከተሰጥኦ ጋር የተሳሰሩ ብቁ ቴክኒካዊ ባህሪያትም አሉት። Rebloom ሞዱላራይዝድ የውጪ ፍሬም በጥልቅነቱ የተከበረ ሲሆን ዓለምን የተሻለ ቦታ ለማድረግ የሚረዱ የሕይወት ጥራት ማሻሻያዎችን ለማቅረብ የተነደፈ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: Due to humidity, typhoons, and earthquakes, Taiwan's power distribution relies on costly crossarm components regularly exchanged every decade.
reBloom extends the lifecycle of these decommissioned components by transforming them into sturdy and weather resistant outdoor frames, with little processing or additional parts. reBloom's modular design also means it is highly adaptable, extendable, and allows for easy part replacement - all of which further maximize component life before recycling.
ልኬቶች እና ማሸጊያ: The inherent dimensions and features of the decommissioned utility crossarm components were integrated to reduce additional processing and material consumption.
Specs of the original crossarm components used in a reBloom set (mm): (a) 2.5 crossarms, hollow square beam 1800 x 750 x 750 (THK 2.5), (b) 8 crossarm braces, 800 x 400 (THK 6), and (c) 12 sets of square nuts and square head bolts, 25 x 25 x 100.
Dimensions of a reBloom section (mm): 825.5 (each section adds 737.5) x 1223.5 x 800 x 75mm.
መለያዎች: circular economy, modular, decommissioned materials, joinery, fence, outdoor, frame, galvanized steel, product life, material lifespan
የማምረቻ ቴክኖሎጂ: The crossarm components that reBloom utilizes are made from hollow, hot-dip galvanized steel beams, and have standardized dimensions and holes (punched via mass-production CNC machines). Little further processing is required to produce a reBloom set beyond some welding, bolt shortening, and assembly - especially when the reBloom design is incorporated during initial crossarm production (adding a few new holes). The standardized and modular design means it is easy to combine the decommissioned components into new forms, such as a fence, furniture structure, etc.
የዲዛይን ተግዳሮት: The hardest design challenge overcome in reBloom was the integration of the square head bolts.
Small and uncommon, it would be wasteful to create a single-use tool for their tightening. The final design includes a simple 'n'-shaped piece that doubles to help users with the last few twists as well as to lock the structure. Additionally challenging was calculating the position of the crossarms' original holes such that the crossarm braces can be evenly spaced and require the least processing.
ምርምር: We sought to design a second life for utility crossarm components, which are regularly decommissioned decades before degradation due to regulations.
Consulted factories told us that the material doesn't easily bend and that welding nullifies its weather resistance. We observed that mass production also required modularization and using existing specs. After brainstorming, we tested different joinery methods. The final design was praised by the utility company and showcased in several exhibits.
መነሳሻ: While on a visit to a utility company's waste stockpiles, we were struck by the prevalence of square head bolts, which are rarely seen in daily life. We wondered if making the format more accessible would give these discarded parts a chance to be reborn. This led us to create reBloom, a modular and adaptable design that extends the lifespan of various decommissioned components. Within reBloom, an ‘n’-shaped piece was designed to be both a wrench for the square head bolts and play an integral part of the final structure.
የፕሮጀክት ጊዜ: The project started in September 2020 and finished in January 2021 in Tainan, Taiwan. Afterwards, a physical exhibition and presentation was held in Taipei in May 2021 and Kaohsiung in March 2022.
የሥራ ሂደት: Due to the rarity of square head bolts nowadays, most people would lack the tools needed to install reBloom. This issue was solved with the inclusion of an 'n'-shaped piece that functions as an easily-held wrench during installation, and lastly integrates into the final structure as a lock between each reBloom frame segment. This design makes it easy for any person to build reBloom.
የፈጠራ ባለቤትነት: Copyrights belong to Victor Wu, 2020.
የምስል ምስጋና: Image #1: Craig Bossley, Scenario, 2021.
Image #2: Victor Wu, Prototyping, 2020.
Image #3: Craig Bossley, Joint Closeup, 2021.
Image #4: Willy Chao, Setup, 2021.
Image #5: Victor Wu, Scenario Closeup, 2021.