Plan Ta ሞዱላር አበባ ማስቀመጫ በ Xavier Zhagui የተሠራ ሲሆን በ ባለ 3 ዲ የታተሙ ቅርጾች እና ምርቶች ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2024 A' Design Award የብረት ሽልማት አሸናፊ ነው።

ብረትባለ 3 ዲ ማተሚያ· 2024

Plan Ta ሞዱላር አበባ ማስቀመጫ

በ Xavier Zhagui

ደንበኛ: DEZIGN for X

በ ባለ 3 ዲ ማተሚያ ምድብ ውስጥ የ A' Design Award የብረት ሽልማት አሸናፊ

34,593

የተረጋገጠ የሽልማት አሸናፊ

ለ #159751 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Plan Ta ሞዱላር አበባ ማስቀመጫ

ዲዛይነሩ በልጅነታቸው በክፍላቸው ውስጥ በተፈጥሯዊ እፅዋት እና በግንባታ ብሎኮች በመከበባቸው ተነሳስተው ሁለቱን የማጣመር መንገድ ስለመኖሩ ጥያቄ አነሱ። ቦታን የሚሞሉ ፖሊሄድሮኖችን እና ባለሶስት ገጽ ማተምን በመጠቀም ዲዛይነሩ ለዚህ ጥያቄ መልስ አገኙ። መፍትሔው ፕላን ታ ተብሎ የተገለጸ ሲሆን፣ የማግኔታዊ እፅዋት ማብቀያ ግንባታ ብሎኮች ስርዓት ሲሆን የተለያዩ የቤት ውስጥ እፅዋትን ማስቀመጥ ብቻ ሳይሆን ለመገንባት እና ለመጫወት ያገለግላል።

እውቅናው

ስለ A' Design Award የብረት ሽልማት

Plan Ta ሞዱላር አበባ ማስቀመጫ የA' Design Award የብረት ሽልማት አሸናፊ ነው፤ ይህም በጥሩ ሁኔታ ከተነደፉ ፈጠራዎች የሚጠበቁትን ሙያዊና ኢንዱስትሪያዊ መስፈርቶች ለሚያሟሉ ጥሩ ዲዛይኖች የሚሰጥ ከፍተኛ ክብር ያለው እውቅና ነው። የብረት አሸናፊዎች የፈጣሪዎቻቸውን ታላቅ ችሎታ፣ ከፍተኛ ልዩ ሙያ፣ የባለሙያ ግንዛቤ እና የፈጠራ አቅም ያሳያሉ። Plan Ta ሞዱላር አበባ ማስቀመጫ ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ ተግባራዊና ፈጠራ የተሞላበት ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብረት ሽልማትን ያሸነፈ ዲዛይን የኢንዱስትሪ ምርጥ ልምዶችን ያዋህዳል፤ ከእውቀትና ከተሰጥኦ ጋር የተሳሰሩ ብቁ ቴክኒካዊ ባህሪያትም አሉት። Plan Ta ሞዱላር አበባ ማስቀመጫ በጥልቅነቱ የተከበረ ሲሆን ዓለምን የተሻለ ቦታ ለማድረግ የሚረዱ የሕይወት ጥራት ማሻሻያዎችን ለማቅረብ የተነደፈ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: Utilizing the unique properties of space filling polyhedrons and 3D printing, I was able to create a system of magnetic planter building blocks that you can play and build with. The modular properties of the design allow for space saving advantages by packing multiple planters together into one structure rather than spread out on a surface. A series of sizes has been created to house different types of plants, the smallest being an air plant, and the biggest being a house plant.
ልኬቶች እና ማሸጊያ: Small Vase
50.8mm x 71.8mm x 50.8mm
Large Vase
127mm x 179.6mm x 127mm
መለያዎች: 3D Printing, Vase, Modular, digital fabrication, dezignforx
የማምረቻ ቴክኖሎጂ: Inner and outer shell are (FDM) 3d printed with a textured finish. Neodymium Sphere magnets are inserted as the connection points. The material is PETG for its water resistance.
የዲዛይን ተግዳሮት: Creating an intuitive module that functioned both as a planter and building blocks that were fun and easy to build with.
ምርምር: Creating a modular form that was intuitive to use and had a simple form led me to research space-filling polyhedrons. Utilizing the rapid prototyping abilities of 3d printing I was able to iterate and experiment with various polyhedron forms to find the most efficient solution. After concluding that rhombic dodecahedron would be the most balanced solution between efficiency and aesthetics, I experimented with different joint connections that would join the modules together. A series of freely rotating magnetic spheres inserted into the vase provided a simple yet effective way of joining the modules together. Material was the final stage of research, 3D printed PLA was the initial choice for its unique characteristics of biodegradability. Unfortunately, it is a very porous material which allowed drainage water leak from the vase. 3D printed PETG was more effective for its water-resistant properties. PETG is not biodegradable compared to PLA, but we are currently researching ways to recycle and cut waste, such as utilizing print to order 3d printing manufacturing strategies compared to wasteful mass production plants.
መነሳሻ: During my childhood I found a deep appreciation for natural plants in my room, and I spent a lot of time playing around and creating with building blocks. I wondered if there was a way to combine the two simple ideas. That question is what drove me to explore different geometries and manufacturing processes such as 3D printing to discover a solution.
የፕሮጀክት ጊዜ: The project was started in July 2018 in Las Vegas and is in the final stages of development for production.
የሥራ ሂደት: All vases connect to each other magnetically by aligning the faces of a vase of the same size allowing you to stack them in any axis. A wall mount has also been designed, allowing you to tile any size vase onto a vertical surface. There are two sizes available, a small one and a large one.
For the small vase you simply insert the air plant into the vase and take it out when it needs to be watered. The large vase has two shells, an interior shell where the plant lives in, and the exterior shell that collects the drainage. To ease maintenance, the interior shell can be removed to allow for easier watering and trimming.
የፈጠራ ባለቤትነት: Patent Pending
የቡድን አባላት: Xavier Zhagui
የምስል ምስጋና: All Images: Photographer Xavier Zhagui, Plan-Ta, 2024.