Saltatur ጠረጴዛ በ Masoud Akbarzadeh የተሠራ ሲሆን በ የቤት ዕቃ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2020 A' Design Award የብር ሽልማት አሸናፊ ነው።
ብርቤት ዕቃ· 2020
Saltatur ጠረጴዛ
ደንበኛ: Polyhedral Structure Laboratory
በ ቤት ዕቃ ምድብ ውስጥ የ A' Design Award የብር ሽልማት አሸናፊ
የተረጋገጠ የሽልማት አሸናፊ
ለ #99680 የሽልማት ሁኔታ ያረጋግጡንድፉ
ስለ Saltatur ጠረጴዛ
ሳልታቱር (Saltatur) ቅድመ-ስሪት የተዋሃደ አወቃቀር ሆኖ የተነደፈ ረጅም-ስፋት ያለው ጠረጴዛ ነው። ጠረጴዛው በጫና-ብቻ የሚሰራ የኮንክሪት አካልን፣ ከድህረ-ውጥረት (post-tensioning) የብረት ዘንጎችን እና እጅግ ቀጭን የመስታወት ላይኛ ክፍልን ያጣምራል። የመስታወቱ ላይኛ ክፍል 3.75 ሜትር የሚሸፍን ፉኒኩላር ባለሦስት-ማጠፊያ ቅስት ሆኖ ተቀርጿል። መዋቅራዊው ቅርፅ በሦስት-ዳይሜንሽናዊ ግራፊክ ስታቲክስ የተዘጋጀ ሲሆን፣ የኮንክሪት አካሉ በላይኛውና በታችኛው በኩል ባሉ የውጥረት ማሰሪያዎች በጫና ውስጥ ይያዛል። ይህ ተለያይ የቦታ ስርዓት መዋቅራዊ አፈጻጸምን ለማስጠበቅ የሚያስፈልገውን ክብደት እየጠበቀ የኮንክሪቱን መጠንና የካርቦን አሻራን ይቀንሳል።
እውቅናው
ስለ A' Design Award የብር ሽልማት
Saltatur ጠረጴዛ የA' Design Award የብር ሽልማት አሸናፊ ነው፤ ይህም ለምርጥ ደረጃ፣ ውብ እና አስደናቂ ዲዛይኖች የሚሰጥ ያልተለመደ ከፍተኛ ክብር ያለው እውቅና ነው። የብር አሸናፊዎች የዲዛይነሮቻቸውን የላቀ ልምድ፣ ተሰጥኦ እና ጥልቅ ማስተዋል የሚያሳዩ እጅግ ብሩህ እና እጅግ ፈጠራ የተሞላባቸው ሥራዎች ናቸው። Saltatur ጠረጴዛ እጅግ ሙያዊና ጥልቅ ፈጠራ የተሞላበት አስደናቂ ማሳያ ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብር ሽልማትን ያሸነፈ ዲዛይን የኪነ ጥበብ፣ የሳይንስ፣ የዲዛይን እና የቴክኖሎጂ ድንበሮችን የሚጠቅምና የሚያስፋፋ ትኩረት የሚስብ፣ የሚደነቅ ፈጠራ ነው። Saltatur ጠረጴዛ ፍላጎትን የሚቀሰቅስ፣ በጎ ስሜት የሚያመጣ እና መደነቅንና መገረምን የሚያቀጣጥል በብዙዎች የሚቀኑበት ፈጠራ ነው።
ከንድፉ በስተጀርባ
የፕሬስ ኪት
ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።
- ልዩ ባህሪያት
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- ልኬቶች እና ማሸጊያ
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- መለያዎች
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- የማምረቻ ቴክኖሎጂ
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- የዲዛይን ተግዳሮት
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- ምርምር
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- መነሳሻ
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- የፕሮጀክት ጊዜ
- 2 years, Weitzman School of Design, University of Pennsylvania
- የሥራ ሂደት
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- የፈጠራ ባለቤትነት
- N/A
- የቡድን አባላት
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- የምስል ምስጋና
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
ስፖንሰር የተደረገ
ከ Designers.org ባሻገር ያስሱ
ከማስታወቂያ አጋሮቻችን ምርቶችን፣ አገልግሎቶችን እና እድሎችን ያግኙ።
ተጨማሪ ለማሰስ
ተዛማጅ ንድፎች
ከተመሳሳይ ምድብ ውስጥ በጥራት የተመረጡ ተጨማሪ ሽልማት-አሸናፊ ንድፎችን ያስሱ።
