Airwood ڈرون کٹ by Uavi Technology is a highly esteemed winner of the very prestigious 2020 A' Design Award آسنین انعام in ٹائز، گیمز ءِ ہوبی پروڈکٹس ڈیزائن Competition Category.

آسنٹوی· 2020

Airwood ڈرون کٹ

by Uavi Technology

Client: UAVI Technology (Shen Zhen) Limited

A' Design Award آسنین انعام Winner in ٹوی Category

17,405

Verified Award Winner

Verify Award Status for #103852

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Airwood ڈرون کٹ

ایئروُوڈ یک اسمبلی ڈرون کٹ اِنت کہ زُرمردانءَ و بالغانی واستہ ڈیزائن بوتگ۔ اے چار-محوری ڈرون یک فریم استعمال کنت کہ کمپوزٹ بیس‌وُوڈ بورڈءِ ہاکہ جوڑ بوتگ، چیا لیزر کٹرءَ چہ دو ملی‌میٹری پتک ٹکہ کتگ۔ کاربر دستی طورءَ چوبی بورڈانی و الیکٹرانک پرزہ‌گانی اسمبلی کنت تاں ڈرون و ریموٹ کنٹرول ہر دوءِ جوڑ بوت۔ ماڈیولر کنٹرولر، موٹر و بیٹری اجازت دنت کہ چہ یک سیٹءَ چند فریم و ظاہری شکل جوڑ بوتگ بوت۔ اے ڈرون اندرونی ہوورنگ، ہوائی عکاسی و گرافیکی پروگرامنگءِ پشتی کنت۔ تصدیق‌شدگ چوب پلاسٹک و فلزءِ استعمالءَ کم کنت۔

The Recognition

About the A' Design Award آسنین انعام

Airwood ڈرون کٹ A' Design Award آسنین انعام ءِ ورگ آ انت، معزز اعتراف کہ آ جوانیں ڈیزائناں دیگ بیت کہ جوانیں ڈولا ڈیزائن کنگ بوتگیں تخلیقاں چہ متوقع پیشہ ورانہ ءُ صنعتی ضرورتاں پورا کننت۔ آسن ءِ ورگ آ وتی خالقاں ءِ مزن مہارت، اعلیٰ ماہری، ماہرانہ سمجھ ءُ تخلیقی صلاحیت پیش کننت۔ Airwood ڈرون کٹ چہ امید کنگ بیت کہ آ یک باز قدر کنگ بوتگیں، ساراہگ بوتگیں ءُ پیارکنگ بوتگیں تخلیق بیت کہ عملی ءُ جدت ءِ انت۔ ای ڈیزائن کہ A' Design Award آسنین انعام ءَ برتگ، صنعت ءِ بہترین طریقہ یکجا کنت ءُ علم ءُ صلاحیت گوں جوڑ بوتگیں قابل تکنیکی خصوصیتاں دار انت۔ Airwood ڈرون کٹ ءِ سنجیدگی ءِ سببا عزت کنگ بیت ءُ آ زندگی ءِ معیار ءَ بہتری آرگ ءِ پہ جوڑ کنگ بوتگ کہ جہان ءَ جوانتر جاگہ جوڑ کنگ ءَ مدد کنت۔

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimensions & Packaging: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Tags: Drone, Wood, DIY, Modularity, Programmable
Production Technology: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Design Challenge: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Research: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspiration: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Project Duration: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Operation Flow: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patents: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Image Credits: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.