Waterlight چراغ by Jiahua Zhang, Nitesh Reddy and Kejun Li

Waterlight چراغ by Jiahua Zhang, Nitesh Reddy and Kejun Li is a highly esteemed winner of the very prestigious 2021 A' Design Award برنجی انعام in لائٹنگ پروڈکٹس ءِ فکچرز ڈیزائن Competition Category.

برنجلائٹنگ· 2021

Waterlight چراغ

by Jiahua Zhang, Nitesh Reddy and Kejun Li

A' Design Award برنجی انعام Winner in لائٹنگ Category

12,743

Verified Award Winner

Verify Award Status for #106626

View at A' Design Award Press Release Award Badge

Colors

The Design

About Waterlight چراغ

واٹرلائٹ یک ڈیسک ٹاپ چراغ اِنت کہ آبی نلکی ءِ (فاسٹ) اِلہام ءَ چ جوڑ بوتگ۔ کنٹرول بار ءَ سرا و بنا گشتین بلوچ ءِ روشنائی ءِ تیزی ءَ بدل کنت۔ کنٹرول بار ءَ چپ ءَ راست ءَ گشتین رنگ ءِ گرمی (کلر ٹمپریچر) ءَ تنظیم کنت۔ سپیئر ءِ اندرا دو پوٹینشیومیٹر ہست، یک اُفقی و یک عمودی، کہ داخلی وولٹیج ءَ بدل کنن تاں اے اثرات پیدا بہ کنن۔ روشنائی اساس ءِ سرا ایل ای ڈی سیلانی چ پیدا بیت۔ سر برونز ءِ چ ساختگ بوتگ، سرین سرپوش طبیعی ماربل ءِ چ و بیرونی خول شیشگ ءِ چ اِنت۔ بنین سرپوش یک سرکٹ ءَ نگہ داریت کہ بے تارین چارجنگ ءِ واستا اِنت، ہمے وجہ ءَ چراغ اتاقانی مابین ءَ برگ بیت۔

The Recognition

About the A' Design Award برنجی انعام

Waterlight چراغ A' Design Award برنجی انعام ءِ ورگ آ انت، باز معزز اعتراف کہ تخلیقی صلاحیت، اختراع ءُ ذہانت گوں ممتاز بہترین ڈیزائناں دیگ بیت۔ برنج ءِ ورگ آ بھرپور مہارت ءِ ءُ نمایاں ڈولا تخلیقی شاہکار انت، کہ وتی ڈیزائنراں ءِ وسیع تجربہ، تخیل ءُ ہوشیاری ءِ تصدیق کننت۔ Waterlight چراغ چہ امید کنگ بیت کہ آ یک باز قدر کنگ بوتگیں، ساراہگ بوتگیں ءُ پیارکنگ بوتگیں چیز بیت، قابل ذکر حد ءَ پیشہ ورانہ ءُ جدت ءِ۔ ای ڈیزائن کہ A' Design Award برنجی انعام ءَ برتگ، فن، سائنس، ڈیزائن ءُ ٹیکنالوجی ءِ بہترین طریقہ شامل کنت ءُ ہورد تفصیلاں ءَ توجہ دیگ ءِ سببا شاندار انت۔ Waterlight چراغ ضرورتاں جوانیں ڈولا پورا کنت، خواہشاں ءَ ہنچیت، جذباں ءَ موہنت ءُ تجسس کشنت۔

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Waterlight generates a unique and amazing experience of light control. Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Dimensions & Packaging: Dimensions: Width 80mm x Depth 80 mm x Height 300 mm.
Technical Properties: The potentiometer is the bridge between the action from the user and the effect of the lamp. It changes the brightness and temperature of the lamp by modifying the input voltage which is controlled by the user through the control bar.
Tags: Light, Aesthetic, Water, Faucet, Lamp, Desktop
Production Technology: The head is fixed with two potentiometers inside the sphere, one is horizontal and the other is vertical. Thus, when the user is turning the control bar up and down, the horizontal potentiometer changes the voltage of the electricity to adjust the brightness of the light; when the user is rolling the control bar left and right, the vertical potentiometer changes the voltage of the electricity to modify the temperature of the light.

The light is provided by the LED cells on a base.

For charging, the bottom lid is integrated with a circuit for wireless charging when it is put on the independent wireless charger that is connected to plugs with wire. The lamp can be taken away after charging (e.g. the lamp is charged in the living room when the user is reading there and taken to the bedroom when the user wants to go there).

The head is made of high-quality bronze, the top lid is made of natural marble. And the outer shell is made of glass.
Design Challenge: The biggest challenge was to build the functional potentiometer and circuit to make this design into reality. In the beginning, it was really hard to link the control action and the change of the brightness and temperature of the light in a proper way. The change always went too much or too little. Finally, we found the balance and created a perfect control feeling.
Research: We would like to create an amazing new interaction between the user and the lamp. After a lot of sketches and brainstorming, we came up with this idea and found out that there was not anything like it in the market. So we did five versions of 1:1 scale prototypes to find the best proportion of the shape, enable the potentiometer working, and find the manufacturing process of the marble. It turned out that we need a horizontal and a vertical potentiometer to control the voltage and hence the brightness and temperature of the light. And we found out that the marble can be made by CNC.
Inspiration: Waterlight was inspired by the water faucet which adjusts the volume of water by being turned up and down, and controls the temperature of water by being turned left and right. It enables users to adjust light like using a water faucet, creating a similar feeling between light control and water control, and bringing about more insights into life.
Project Duration: This project started in October 2019 and finished in January 2020 in Milan.
Operation Flow: Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Team Members: Nitesh Reddy N
Kejun Li