The Flett Покривна обшивка (флашинг) от Scott Flett

Дизайнът The Flett Покривна обшивка (флашинг) от Scott Flett е високо уважаван носител на престижната 2023 Желязна награда A' Design Award в състезателна категория Дизайн на 3D принтирани форми и продукти.

Желязо3D принтиране· 2023

The Flett Покривна обшивка (флашинг)

от Scott Flett

Клиент: Scott Flett Architecture Workshop.

Носител на Желязна награда A' Design Award в категория 3D принтиране

34,956

Верифициран носител на награда

Проверете статуса на наградата за #141650

Посетете сайта Вижте в A' Design Award Прессъобщение Значка за награда

Цветове

Дизайнът

За The Flett Покривна обшивка (флашинг)

Flett е покривна обшивка (флашинг), проектирана за архитектурни покрития с фалцов шев. Обшивката се произвежда чрез 3D печат от ASA пластмаса, с размери 265 на 50 на 100 милиметра и дебелина 2 милиметра. Формата преминава под единия покривен лист, позволява промяна на посоката, след което застъпва следващия лист. Елементът е съобразен с профила и цвета на покривния лист, а материалът е термоустойчив, UV устойчив и нетоксичен. Обшивката може да се монтира последователно от общи строителни специалисти и има за цел да намали течовете при труднодостъпни покривни съединения.

Признанието

За Желязна награда A' Design Award

The Flett Покривна обшивка (флашинг) е носител на Желязната награда A' Design Award — престижно признание, присъждано на добри дизайни, които отговарят на професионалните и индустриалните изисквания, очаквани от добре проектирани творения. Желязните победители демонстрират голямо умение, висока специализация, експертно разбиране и творчески капацитет на своите създатели. Очаква се The Flett Покривна обшивка (флашинг) да бъде високо ценено, възхищавано и обичано творение, което е практично и иновативно. Този дизайн, спечелил Желязната награда A' Design Award, интегрира най-добрите отраслови практики и притежава компетентни технически характеристики, свързани с ноу-хау и талант. The Flett Покривна обшивка (флашинг) се радва на уважение заради щателността си и предлага подобрения в качеството на живот, които помагат светът да стане по-добро място.

Зад дизайна

Прескомплект

Информация за екипа, авторите и техническите детайли, предоставена от дизайнера.

Уникални свойства: The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
Размери и опаковка: 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile.
Тагове: roof, flashing, roof flashing, 3d print, 3d printing, additive forming
Производствена технология: The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent.
Дизайнерско предизвикателство: Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
Изследване: The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem.
Вдъхновение: Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
Продължителност на проекта: The project started on January 2017 and is ongoing.

The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.

The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.

I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'.
Работен процес: I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.

The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations.
Патенти: Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop

Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728
Членове на екипа: Scott Flett
Автори на изображенията: Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo