Morita Wds 2023 Izložbeni štand od Shotaro Inahara

Dizajn Morita Wds 2023 Izložbeni štand od dizajnera Shotaro Inahara je visoko cijenjeni dobitnik prestižne nagrade 2025 Srebrna nagrada A' Design Award u kategoriji Dizajn Arhitekture Sajmova, Enterijera i Izložbi.

SrebroSajam· 2025

Morita Wds 2023 Izložbeni štand

autor Shotaro Inahara

Klijent: HAKUTEN Corporation

Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Sajam

20,489

Verificirani dobitnik nagrade

Verificirajte status nagrade za #162228

Posjetite stranicu Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Morita Wds 2023 Izložbeni štand

Morita Wds 2023 je izložbeni štand kreiran za proizvođača stomatološke opreme. Štand ima dimenzije 32000 x 15000 x 4500 milimetara. Dizajn predstavlja pozadinu proizvoda, a ne samo proizvode. Dijelovi su rastavljeni i izloženi, unutrašnji mehanizmi su prikazani kroz prozirne prozore, a dimenzije su otkrivene kako bi se objasnila namjera dizajna. Zidni paneli izrađeni su od otpadnog lima preostalog nakon štancanja. Konstrukcija je pričvršćena vijcima bez ljepila, tako da se materijali mogu reciklirati.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Morita Wds 2023 Izložbeni štand je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i impresivnim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Morita Wds 2023 Izložbeni štand bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomjera granice umjetnosti, nauke, dizajna i tehnologije. Morita Wds 2023 Izložbeni štand je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Began with a deep understanding of Morita by reading the technical history that describes how the products were made. The exhibition also included a tour of the manufacturing process and interviews about the company's commitment to its products. The exhibition also included a fascinating behind-the-scenes look at the products, including an introduction to the development story, a transparent and disassembled mechanism display, and an appeal to the design intent by exposing the dimensions.
Dimenzije i pakovanje: The overall dimensions of the booth are W32000 x D15000 x H4500 mm.
Oznake: Exhibition,Booth,Sustainability,Branding,Luminous Signs,Dental,Equipment
Tehnologija proizvodnje: The “MORITA MUSEUM” sign. The sign is side-illuminated, and one side is embedded in the wall to suggest that this is a booth that attracts visitors to Morita from a different angle.
The base design of the graphics is based on drawings, which gives visitors a sense of the product manufacturing process.
The wrighting of the corner signs is not based on product names, but on words that are beneficial to visitors, in order to induce their interest in the contents of the corner.
Dizajnerski izazov: Based on the above, the booth will be a “fascinating display of the invisible” by (1) disassembling the product part by part, (2) introducing the development process and its secret story, (3) showing the internal mechanism through a transparent window, and (4) showing the design attention to detail through the dimensions of the product.
Istraživanje: We also visited Morita Manufacturing Corporation, where the products are actually manufactured, to observe the manufacturing process and hear about the developer's commitment to the products.
Inspiracija: Morita also exhibited at the annual regional dental shows. There, the company exhibits directly related to sales promotion, focusing on products and services, and it was a place to sell products. This year's WDS will focus not only on products, but also on their backgrounds. Who and what kind of thoughts and processes go into the making of a product. The experience was designed as a branding opportunity for people to learn more about Morita and become fans.
Trajanje projekta: The project started in September 29, 2023 and finished in October 1, 2023 in Yokohama.
Tok rada: On the wall, we used a scrap piece of sheet metal from which parts had been die-cut.The design matched the concept of this exhibition as a material reminiscent of the manufacturing process, and the design also functioned as an eye-catcher, attracting visitors' interest by allowing them to see inside the booth through the hole in the wall.
The booth was fixed with screws, without using any adhesives, so that it could be returned to the factory and returned to the normal recycling flow.
Članovi tima: Designer : Shotaro Inahara
Art Director : Akiyuki Maruyama
Producer : Tatsuya Sato
Producer : Riku Nishihara
Product Manager : Toshiki Takei
Autorstvo slika: Image #No1~5 : Photographer, Akira Arai.