Bulawan Arkitektura · 2024
Aida Sekkei Precut Pabrika
- A' Design Award nga Bulawan 2024 in Arkitektura
- CLIENT: Aida Sekkei Co., Ltd.
- Estimated Number of Design Views: 148,971
- Verification code 60275D61D5 · Verify this award
Colors
About Aida Sekkei Precut Pabrika
Ang bag-ong plano sa pabrika sa Aida Sekkei nakapokus sa pag-pre-cut sa kahoy. Ang konsepto niini nagtumong sa paghimo og arkitektura nga nagsimbolo sa serye sa pagproseso sa timber. Naglakip kini og naglutaw nga agianan nga gipalibotan ug kristal nga mga 100 ka metro ang gitas-on sa sulod sa pabrika, gidesinyo aron ang mga bisita makatan-aw og maayo sa tibuok proseso sa pag-pre-cut. Ang building sa opisina adunay dagkong mga espasyo nga may mga truss nga gikan sa feather edge nga mga materyales, nga kasagaran gigamit isip sub-materials sa mga balay nga kahoy. Ang disenyo naghiusa sa tanang elemento aron makahimo og showcase nga pabrika, nga nagpasiugda sa visibility ug aesthetic appeal sa matag aspeto.
About the A' Design Award nga Bulawan
Aida Sekkei Precut Pabrika usa ka mananaog sa A' Design Award nga Bulawan, usa ka hilabihan ka prestihiyoso nga pag-ila nga gihatag sa unang-klase, katingalahan, ug bantogan nga mga disenyo. Ang mga mananaog sa Bulawan labihan ka bag-o, daghan og panan-aw, ug nagsidlak nga mga paglalang nga nagpakita sa henyo, kinaadman, ug kahanas sa ilang mga tigdesinyo. Gilauman nga ang Aida Sekkei Precut Pabrika mahimong labing gidayeg, nagtakda og uso, ug monumental nga imbento nga naghatag og bili nga wala pa makita. Kini nga disenyo nga nakadaog og A' Design Award nga Bulawan usa ka makapahingangha ug gitahod nga proyekto nga labihan ka mapuslanon ug nagpalapad sa mga utlanan sa arte, siyensya, disenyo, ug teknolohiya. Aida Sekkei Precut Pabrika nagmugna og kusog nga mga pagbati sa kaibog, nagpukaw og kahinam, nagdasig sa pagkamamugnaon, ug nagbihag kanato.
Press Kit
- Unique Properties
- This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
- Dimensions & Packaging
- Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2
Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden
Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2 - Tags
- architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
- Production Technology
- As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
- Design Challenge
- When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
- Research
- Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
- Inspiration
- Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
- Project Duration
- This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
- Operation Flow
- This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
- Patents
- None
- Image Credits
- Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020
