C3 Sterilization Lababo sa Kusina by Nuomi is a highly esteemed winner of the very prestigious 2025 A' Design Award nga Pilak in Disenyo sa Muwebles sa Kusina, Kagamitan ug Fixture Competition Category.
PilakMuwebles sa Kusina· 2025
C3 Sterilization Lababo sa Kusina
by Nuomi
Client: Guangdong Nuomi Home Intelligent Technology Co.,Ltd
A' Design Award nga Pilak Winner in Muwebles sa Kusina Category
- 46,412
- Verified Award Winner
- Verify Award Status for #172108
The Design
About C3 Sterilization Lababo sa Kusina
Ang C3 Sterilization usa ka lababo sa kusina nga adunay gilakip nga pag-atiman sa tadtaran. Ang usa ka built-in nga kompartamento naggamit sa ultraviolet nga suga ug sirkulasyon sa init nga hangin aron ma-sterilize ug mauga ang tadtaran sulod sa 15 ka minuto. Ang proseso sa pag-atiman awtomatikong magsugod kung ibutang ang tadtaran sa sulod, ug ang usa ka sensor light strip nagpakita sa kahimtang sa pagtrabaho. Ang mga sulod nga bungbong adunay nano hydrophobic nga coating alang sa resistensya sa mga garas ug pagpanghinlo sa kaugalingon, ug ang tubo sa kanal adunay antibacterial nga silver ion nga sapaw. Ang usa ka bertikal nga disenyo sa tipiganan nga adunay magnetic nga sang-atanan sa kutsilyo makadaginot ug luna sa gagmay nga mga kusina.
The Recognition
About the A' Design Award nga Pilak
C3 Sterilization Lababo sa Kusina usa ka mananaog sa A' Design Award nga Pilak, usa ka talagsaon kaayo nga prestihiyoso nga pag-ila nga gihatag sa labing taas nga lebel, matahom, ug makadani nga mga disenyo. Ang mga mananaog sa Pilak labihan ka hayag ug mamugnaon nga mga buhat nga nagpakita sa bantogan nga kahanas, talento, ug kamatngon sa ilang mga tigdesinyo. Gilauman nga ang C3 Sterilization Lababo sa Kusina mahimong talagsaon nga buhat nga ipasigarbo, dako ang pagkapropesyonal ug lawom ang kabag-ohan. Kini nga disenyo nga nakadaog og A' Design Award nga Pilak usa ka labihan ka mamatikdan, gihangaan nga imbento nga mapuslanon ug nagpalapad sa mga utlanan sa arte, siyensya, disenyo, ug teknolohiya. C3 Sterilization Lababo sa Kusina usa ka paglalang nga giinggit sa daghan, nga nagpukaw og mga tinguha, nagdala og positibo nga mga pagbati, ug nagsiga sa katingala ug paghangyo.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
- Dimensions & Packaging
- 780*482*220mm
- Tags
- integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
- Production Technology
- The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
- Design Challenge
- The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
- Research
- In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
- Inspiration
- It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
- Project Duration
- The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
- Operation Flow
- UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
