Mae Arch Cadair, Cadair Ddi-gefn gan Edvard Glazebrook yn enillydd uchel ei barch o'r 2021 Gwobr Efydd A' Design Award mawreddog iawn yng Nghategori Cystadleuaeth Dylunio Dodrefn.
EfyddDodrefn· 2021
Arch Cadair, Cadair Ddi-gefn
Enillydd Gwobr Efydd A' Design Award yn y Categori Dodrefn
Enillydd Gwobr Wedi'i Wirio
Gwirio Statws Gwobr ar gyfer #106853Y Dyluniad
Am Arch Cadair, Cadair Ddi-gefn
Mae Arch yn gadair ac yn sedd ddi-gefn wedi'i gwneud o bren pinwydd lamineiddiedig wedi'i gerfio a'i staenio'n ddu. Mae'r dyluniad yn seiliedig ar ffurfiau a siapiau syml ac ailadroddus, sy'n rhoi mynegiant unffurf a rhesymegol i'r dodrefnyn. Mae pum bwa unfath yn ffurfio coesau a chefn y gadair, tra bod y sedd ddi-gefn wedi'i gwneud o dri hanner-bwa sy'n cyfarfod yn y canol. Mae pob rhan wedi'i thorri o blât pren lamineiddiedig gyda llifiwr CNC, yna'n cael ei gludio a'i chysylltu â dyfnau pren. Mae'r crymiadau'n cryfhau'r dodrefnyn yn ei mannau gwannaf.
Y Gydnabyddiaeth
Am y Gwobr Efydd A' Design Award
Mae Arch Cadair, Cadair Ddi-gefn yn enillydd Gwobr Efydd A' Design Award, cydnabyddiaeth hynod fawreddog a roddir i ddyluniadau rhagorol sydd yn nodedig am greadigrwydd, dyfeisgarwch a chraffter. Mae enillwyr Efydd yn arteffactau medrus iawn a thrawiadol o greadigol sydd yn dilysu profiad helaeth, dychymyg a dyfeisgarwch eu dylunwyr. Disgwylir i Arch Cadair, Cadair Ddi-gefn fod yn wrthrych uchel ei fri, a edmygir ac a anwylir, sydd yn nodedig o broffesiynol ac arloesol. Mae'r dyluniad buddugol hwn o Wobr Efydd A' Design Award yn ymgorffori arferion gorau mewn celf, gwyddoniaeth, dylunio a thechnoleg, ac yn rhagorol am ei sylw i fanylion. Mae Arch Cadair, Cadair Ddi-gefn yn bodloni anghenion yn odidog, yn cyffwrdd â dyheadau, yn swyno teimladau ac yn apelio at chwilfrydedd.
Y Tu Ôl i'r Dyluniad
Pecyn i'r Wasg
Credydau, aelodau tîm a manylion technegol a ddarparwyd gan y dylunydd.
- Priodweddau Unigryw
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensiynau a Phecynnu
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tagiau
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Technoleg Cynhyrchu
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Her Dylunio
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Ymchwil
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Ysbrydoliaeth
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Hyd y Prosiect
- The project started in march 2020 - and finished in late May 2020.
- Llif Gweithrediad
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patentau
- Copyrights belong to Edvard Glazebrook, 2020
- Aelodau'r Tîm
- Edvard Glazebrook
Noddedig
Archwiliwch y Tu Hwnt i Designers.org
Darganfyddwch gynhyrchion, gwasanaethau a chyfleoedd gan ein partneriaid hysbysebu.
Mwy i'w Archwilio
Dyluniadau Cysylltiedig
Archwiliwch ragor o ddyluniadau arobryn o'r un categori, wedi'u dewis yn ôl teilyngdod.
