Skip to content
5x5 Cadair by Barbara Princic

5x5 Cadair by Barbara Princic is a highly esteemed winner of the very prestigious 2014 Gwobr Arian A' Design Award in Dylunio Dodrefn Competition Category.


ArianDodrefn· 2014

5x5 Cadair

by Barbara Princic

Client: Sijaj Hrastnik

Gwobr Arian A' Design Award Winner in Dodrefn Category

Colors

Email this page

The Design

About 5x5 Cadair

Mae'r gadair 5x5 yn brosiect dylunio nodweddiadol lle mae'r cyfyngiad yn cael ei gydnabod fel her. Mae sedd y gadair a'r cefn wedi'u gwneud o xilith sy'n anodd iawn ei siapio. Xilith yw'r deunydd crai y gellir ei ddarganfod 300 metr o dan wyneb y ddaear ac mae wedi'i orchuddio â glo. Ar hyn o bryd mae mwyafrif y deunydd crai yn cael ei daflu. O safbwynt amgylcheddol mae'r deunydd hwn yn cynhyrchu gwastraff ar wyneb y ddaear. Felly roedd yn ymddangos bod y syniad am ddyluniad y gadair yn bryfoclyd ac yn heriol iawn.

The Recognition

About the Gwobr Arian A' Design Award

Mae 5x5 Cadair yn enillydd Gwobr Arian A' Design Award, cydnabyddiaeth hynod fawreddog a roddir i ddyluniadau o'r radd uchaf, hardd a thrawiadol. Mae enillwyr Arian yn weithiau tra disglair a hynod greadigol sydd yn darlunio arbenigedd, dawn a chraffter rhagorol eu dylunwyr. Disgwylir i 5x5 Cadair fod yn waith gwych ac esiampl, yn nodedig o broffesiynol ac yn ddwfn arloesol. Mae'r dyluniad buddugol hwn o Wobr Arian A' Design Award yn ddyfais hynod nodedig a edmygir sydd yn elwa ac yn symud ymlaen ffiniau celf, gwyddoniaeth, dylunio a thechnoleg. Mae 5x5 Cadair yn greadigaeth y cenfigennir wrthi yn eang, sydd yn deffro dyheadau, yn cyflwyno teimladau cadarnhaol ac yn cynnau rhyfeddod a syndod.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties
The 5x5 chair is a typical design project where the limitation is recognized as a challenge. The chair's seat and the back are made of xilith which is very difficult to be shaped. Xilith is the raw material that can be found 300 meters under the ground surface and is comined with a coal. But it is nither the coal nor the wood. Currently the majority of the raw material is thrown away. From environmental point of view this material generates waste on the earth surface. Therefore the idea about chair design seemed to be very provocative and challenging. The scientific methods of the material's final surface treatment have been explored so if applied properly the final look can be close to that of ebony.
Each chair is unique as neither two tiles look the same. Therefore the chair can have more brown or more black look depending on the tiles collected together.
Dimensions & Packaging
Width 470 mm x Depth 540 mm x Hight 840 mm
Tags
xilith, tiles, metal, elegant, thin, material innovation, experiment
Production Technology
Chair's structure:
- metal tub legs, surface nickel treated
- seat and back support made of laser cutted metal sheet, surface nickel treated
- Xilith tiles, cut, surface treated with linseed oil;
tiles glued on metal sheet surface
Design Challenge
Material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
The design challenge was simply how to make a chair from little tiles? how to connect them? How to make the underneath seat's metal sheet stiff but yet almost invisible, thin.
Research
It was all about experimental work with this unique material. The scientific methods of surface treatment were examined years before within Biotechnological Faculty, University of Ljubljana. If the surface is treated properly, the outcome look is similar to ebony.
Inspiration
As explained in the project explanation; material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
Xilith is the raw material that is very hard and fragile. Therefore the tile's dimension 5x5 cm is the maximum still acceptable dimension for manufacturing since the material itself is very difficult to be manufactured and shaped.
Project Duration
The project started in May 2008 and finished in October 2008 in Slovenia. It was exhibited at several exhibitions like
- Month of Design, October 2008, Ljubljana, Slovenia
- Reader-friendly Design, January 2010, Ljubljana, Slovenia
- The Design Assembly, May 2010, Graz, Austria
- IDEA Award Winners and Finalists exhibition, August 2010, Henry Ford Museum, Michigan USA
- Charm of wood, spring 2011, Ljubljana, Slovenia
- Ambient, furniture fair, October 2013, Ljubljana, Slovenia
Operation Flow
It enables very comfortable and ergonomic sitting.
Team Members
Barbara Princic, designer
Mr. Miran Drac, technologist
Image Credits
Images No.1-5, photographer Miha Benedicic, 5x5 chair, 2009.

Sponsored

Explore Beyond Designers.org

Discover products, services and opportunities from our advertising partners.

Good Design Deserves Great Recognition

Nominate Your Work for the A' Design Award.

Nominate