Sprout Cykel af JunXiang Cheng and Yi Yang er en højt anset vinder af den meget prestigefyldte 2022 A' Design Award i Jern i konkurrencekategorien 3D-printede Former og Produkter Design.
Jern3D-print· 2022
Sprout Cykel
Klient: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
Vinder af A' Design Award i Jern i kategorien 3D-print
Verificeret Prisvinder
Verificer Prisstatus for #137286Designet
Om Sprout Cykel
Sprout er en cykel fremstillet ved hjælp af tredimensionel print. Stellet er formet gennem topologioptimering, som kun placerer materiale, hvor det er nødvendigt, og reducerer den samlede mængde, der anvendes. Statisk spændingsanalyse med finite element-metoden verificerer stabiliteten af stelkonstruktionen. Den endelige model er printet i nylon med høj densitet. Cyklen måler 1630 mm i længden, 600 mm i bredden og 832 mm i højden. Print fjerner behovet for dyre forme, så hvert stel kan følge et individuelt design.
Anerkendelsen
Om A' Design Award i Jern
Sprout Cykel er vinder af A' Design Award i Jern, en prestigefyldt anerkendelse, der tildeles gode designs, som opfylder de professionelle og industrielle krav, man forventer af veldesignede skabelser. Jernvinderne viser stor dygtighed, høj specialisering, ekspertforståelse og kreativ kapacitet hos deres skabere. Sprout Cykel forventes at være en højt estimeret, beundret og kær skabelse, der er praktisk og innovativ. Dette design, der har vundet A' Design Award i Jern, integrerer branchens bedste praksis og har kompetente tekniske egenskaber knyttet til knowhow og talent. Sprout Cykel respekteres for sin grundighed og er designet til at levere forbedringer af livskvaliteten, der er med til at gøre verden til et bedre sted.
Bag Designet
Pressemappe
Credits, teammedlemmer og tekniske detaljer leveret af designeren.
- Unikke Egenskaber
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- Dimensioner & Emballage
- Length 1630mm, width600mm, height 832mm
- Tags
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- Produktionsteknologi
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- Designudfordring
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- Forskning
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- Inspiration
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- Projektvarighed
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- Driftsflow
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- Teammedlemmer
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
Sponsoreret
Udforsk Udover Designers.org
Opdag produkter, tjenester og muligheder fra vores annoncepartnere.
Mere at Udforske
Relaterede Design
Udforsk flere prisvindende design fra samme kategori, udvalgt efter fortjeneste.
