The Flett Tegmenta Flanka de Scott Flett

La dizajno The Flett Tegmenta Flanka de Scott Flett estas tre estimata gajninto de la prestiĝa 2023 Fera A' Design Award en la Konkursa Kategorio Dezajno de 3D-Presitaj Formoj kaj Produktoj.

Fero3D-Presado· 2023

The Flett Tegmenta Flanka

de Scott Flett

Kliento: Scott Flett Architecture Workshop.

Gajninto de Fera A' Design Award en la Kategorio 3D-Presado

34,956

Kontrolita Premiogajninto

Kontroli Premiostaton por #141650

Viziti Retejon Vidi ĉe A' Design Award Gazetara Komuniko Premia Insigno

Koloroj

La Dezajno

Pri The Flett Tegmenta Flanka

La Flett estas tegmenta flankaĵo (flashing) desegnita por vertikalfalda arkitektura tegado. La flankaĵo estas produktita per 3D-presado en ASA-plasto, mezuras 265 je 50 je 100 milimetrojn kaj estas 2 milimetrojn dika. La formo subkuŝas sub unu tegan folion, permesas direktoŝanĝon, poste surkuŝas sur la sekvan folion. La parto estas kongruigita al la profilo kaj koloro de la tegofolio, kaj la materialo estas termike stabila, UV-stabila kaj netoksa. La flankaĵo povas esti instalita sinsekve de ĝeneralaj metiistoj, kaj celas redukti likojn ĉe malfacilaj tegmentaj kunliĝoj.

La Agnosko

Pri la Fera A' Design Award

The Flett Tegmenta Flanka estas gajninto de la Fera A' Design Award, prestiĝa rekono donata al bonaj dezajnoj, kiuj plenumas la profesiajn kaj industriajn postulojn atendatajn de bone dezajnitaj kreaĵoj. La Feraj gajnintoj montras grandan lertecon, altan specialiĝon, spertan komprenon kaj kreivan kapablon de siaj kreintoj. Oni atendas, ke The Flett Tegmenta Flanka estu tre estimata, admirata kaj ŝatata kreaĵo, kiu estas praktika kaj nova. Ĉi tiu dezajno gajninta la Feran A' Design Award integras plej bonajn industriajn praktikojn kaj havas kompetentajn teknikajn karakterizojn ligitajn kun scipovo kaj talento. The Flett Tegmenta Flanka estas respektata pro sia zorgemo kaj estas dezajnita por provizi plibonigojn de la vivokvalito, kiuj helpas fari la mondon pli bona loko.

Malantaŭ la Dezajno

Gazetara Dosiero

Kreditoj, teamanoj kaj teknikaj detaloj provizitaj de la dezajnisto.

Unikaj Ecoj: The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
Dimensioj kaj Pakado: 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile.
Etikedoj: roof, flashing, roof flashing, 3d print, 3d printing, additive forming
Produkta Teknologio: The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent.
Dizajna Defio: Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
Esplorado: The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem.
Inspiro: Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
Projekta Daŭro: The project started on January 2017 and is ongoing.

The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.

The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.

I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'.
Funkcia Fluo: I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.

The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations.
Patentoj: Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop

Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728
Teamanoj: Scott Flett
Bildaj Kreditoj: Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo