Luf Ĝermigujo by Industrial Design College of LAFA

Luf Ĝermigujo by Industrial Design College of LAFA is a highly esteemed winner of the very prestigious 2023 Fera A' Design Award in Daŭripovaj Produktoj, Projektoj kaj Verda Dezajno Competition Category.

FeroDaŭripova Produkto· 2023

Luf Ĝermigujo

by Industrial Design College of LAFA

Client: LuXun Academy of Fine Arts

Fera A' Design Award Winner in Daŭripova Produkto Category

23,692

Verified Award Winner

Verify Award Status for #148786

View at A' Design Award Press Release Award Badge

Colors

The Design

About Luf Ĝermigujo

Luf estas ĝermigujo farita el luffa-fibro. Luf anstataŭigas plastajn ujojn per biodegradebla materialo formita el dispremita luffa, biobazita gluaĵo kaj hardagento, kiuj estas hejtataj kaj premataj en muldilo. La ujoj stakiĝas kune, tiel ke unu persono povas porti pli ol kvin ujojn samtempe. Ĉiu ujo estas dividita en tri sendependajn partojn kaj povas esti tranĉita laŭ markitaj linioj. Post kiam la ĝermoj maturiĝas, la ujo estas plantita en la teron, kie ĝi malkomponiĝas en nutraĵojn. Luffa-semoj povas esti kolektitaj kaj uzataj por plua kultivado.

The Recognition

About the Fera A' Design Award

Luf Ĝermigujo estas gajninto de la Fera A' Design Award, prestiĝa rekono donata al bonaj dezajnoj, kiuj plenumas la profesiajn kaj industriajn postulojn atendatajn de bone dezajnitaj kreaĵoj. La Feraj gajnintoj montras grandan lertecon, altan specialiĝon, spertan komprenon kaj kreivan kapablon de siaj kreintoj. Oni atendas, ke Luf Ĝermigujo estu tre estimata, admirata kaj ŝatata kreaĵo, kiu estas praktika kaj nova. Ĉi tiu dezajno gajninta la Feran A' Design Award integras plej bonajn industriajn praktikojn kaj havas kompetentajn teknikajn karakterizojn ligitajn kun scipovo kaj talento. Luf Ĝermigujo estas respektata pro sia zorgemo kaj estas dezajnita por provizi plibonigojn de la vivokvalito, kiuj helpas fari la mondon pli bona loko.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The development model of converting plastic seedling trays "from cradle to grave" to loofah biodegradable trays "from cradle to cradle". Break the loofah and hot-press glutinous rice glue to synthesize new materials. The trays can be interspersed up and down and a single person can carry more than five trays at a time. Transplanted into the soil and degraded into nutrients. The chassis can be reused or dried for crops, and the loofah seeds can also be recycled to continue seedling cultivation.
Dimensions & Packaging: Width 800mm x Depth 490mm x Height 70mm，The size of the hole plate is 540 mm*280 mm. Vegetable seedlings generally use 50 to 288holes. The shape of the holes is round or square, generally between 0.6 and 1.2 mm.
Tags: Loofah, seedling tray, transportation, rural revitalization strategy, sustainable design
Production Technology: Prepare 50 parts of loofah fiber, 15 parts of bio-based green adhesive, 1 part of curing agent, and 2 parts of ethanol diluent in the weight ratio, and heat the prepared materials in the mold at 20 °C to 0.2 MPa for 60 min. The finished product has been tested for load-bearing, water seepage, stretching, and degradation. After the loofah is crushed and combined with other green raw materials, it can form a block shape, which meets the basic standards for seedling trays.
Design Challenge: Applying the loofah material of agricultural waste to seedling trays, from the perspective of circular design, it is necessary to meet the functionality while conforming to the sustainable design theory, and give full play to the social, cultural and commercial values of agricultural waste in the design. New rural construction under the strategy of rural revitalization. It should be explored whether this material can be directly applied to 3D printing to make more finished products.
Research: (1)Clean up the loofah fiber to remove impurities (2) Dry the loofah fiber (3) Add binder and diluent to the dried loofah fiber and stir fully to make a premix (4) Mix well The final premix is added with curing agent and then fully stirred as a preparation (5) Heat the preparation in the mold at 20°C to 0.2MPa and pre-press for 60min (6) Heat at 20°C and press at 40MPa for 10min The finished product is obtained.
Inspiration: In China's vigorous implementation of the rural revitalization strategy, the scale of agricultural production has expanded, leading to an increase in crop residues. With the advantages of high yield and degradability of loofah, it has been widely used in the field of seedling cultivation along with the "C2C" concept. Large-scale nursery bases are mechanized facilities and are not suitable for rural areas. Natural materials used in plant cultivation are finally back to nature.
Project Duration: The project started in May 2022 and finished in January 2023 in Lu Xun Academy of Fine Arts.
Operation Flow: Establish a closed cycle metabolic process of "production-recovery-remanufacture" of raw materials. The chassis of the whole seedling can be carried by a single person according to the weight of more than 5 trays, which are divided into three independent trays. After the plant seedlings are mature, they are transplanted into the soil, and can be cut as a whole or along the dotted line to be transplanted as independent individuals. After transplanting, they will soon decompose into the soil.
Team Members: Designer: Du Heli
Designer: Jia Zhuohang
Designer: Xue Bomu
Image Credits: Image #1: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #2: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #3: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #4: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #5: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023