Sprout Bicicleta de JunXiang Cheng and Yi Yang

El diseño Sprout Bicicleta de JunXiang Cheng and Yi Yang es un ganador altamente estimado del prestigioso 2022 A' Design Award de Hierro en la categoría de competición Diseño de Impresión 3D.

HierroImpresión 3D· 2022

Sprout Bicicleta

de JunXiang Cheng and Yi Yang

Cliente: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Ganador del A' Design Award de Hierro en la Categoría Impresión 3D

31,470

Ganador de Premio Verificado

Verificar Estado del Premio para #137286

Ver en A' Design Award Nota de Prensa Insignia del Premio

Colores

El Diseño

Acerca de Sprout Bicicleta

Sprout es una bicicleta fabricada mediante impresión tridimensional. El cuadro se ha configurado a través de una optimización topológica, que sitúa el material únicamente donde es necesario y reduce la cantidad total empleada. Un análisis estático de tensiones con el método de los elementos finitos verifica la estabilidad de la estructura del cuadro. El modelo final se imprime en nailon de alta densidad. La bicicleta mide 1630 mm de largo, 600 mm de ancho y 832 mm de alto. La impresión elimina la necesidad de costosos moldes, por lo que cada cuadro puede responder a un diseño individual.

El Reconocimiento

Acerca del A' Design Award de Hierro

Sprout Bicicleta ha ganado el A' Design Award de Hierro, un reconocimiento prestigioso concedido a buenos diseños que cumplen los requisitos profesionales e industriales que se esperan de creaciones bien diseñadas. Los ganadores de Hierro demuestran gran habilidad, alta especialización, comprensión experta y capacidad creativa de sus creadores. Se espera que Sprout Bicicleta sea una creación muy apreciada, admirada y querida, práctica e innovadora. Este diseño ganador del A' Design Award de Hierro integra las mejores prácticas del sector y tiene características técnicas competentes unidas a conocimiento práctico y talento. Sprout Bicicleta es respetado por su minuciosidad y está concebido para aportar mejoras en la calidad de vida que ayudan a hacer del mundo un lugar mejor.

Detrás del Diseño

Kit de Prensa

Créditos, miembros del equipo y detalles técnicos proporcionados por el diseñador.

Propiedades Únicas: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimensiones y Embalaje: Length 1630mm, width600mm, height 832mm
Etiquetas: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Tecnología de Producción: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Desafío de Diseño: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Investigación: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiración: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Duración del Proyecto: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Flujo de Operación: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Miembros del Equipo: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao