Disainilahendus Waterlight Lamp, autor Jiahua Zhang, Nitesh Reddy and Kejun Li

Disainilahendus Waterlight Lamp, mille autor on Jiahua Zhang, Nitesh Reddy and Kejun Li, on kõrgelt hinnatud 2021 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Valgustitoodete ja -tarvikute disain.

PronksValgustus· 2021

Waterlight Lamp

disainer: Jiahua Zhang, Nitesh Reddy and Kejun Li

Auhind Pronksauhind A' Design Award kategoorias Valgustus

12,743

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #106626

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Waterlight Lamp

Waterlight on laualamp, mille inspiratsiooniallikaks on veekraan. Juhtkangi liigutamine üles-alla muudab valguse heledust. Juhtkangi keeramine vasakult paremale reguleerib värvustemperatuuri. Kera sees asuvad kaks potentsiomeetrit, üks horisontaalne ja teine vertikaalne, mis muudavad sisendpinget nende efektide loomiseks. Valgust toodavad aluspõhjal paiknevad LED-elemendid. Pea on valmistatud pronksist, ülemine kaas naturaalsest marmorist ja välimine kest klaasist. Alumine kaas sisaldab juhtmevaba laadimise vooluringi, tänu millele saab lampi tubade vahel kaasas kanda.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Waterlight Lamp on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Waterlight Lamp peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Waterlight Lamp rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: Waterlight generates a unique and amazing experience of light control. Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Mõõtmed ja pakend: Dimensions: Width 80mm x Depth 80 mm x Height 300 mm.
Technical Properties: The potentiometer is the bridge between the action from the user and the effect of the lamp. It changes the brightness and temperature of the lamp by modifying the input voltage which is controlled by the user through the control bar.
Sildid: Light, Aesthetic, Water, Faucet, Lamp, Desktop
Tootmistehnoloogia: The head is fixed with two potentiometers inside the sphere, one is horizontal and the other is vertical. Thus, when the user is turning the control bar up and down, the horizontal potentiometer changes the voltage of the electricity to adjust the brightness of the light; when the user is rolling the control bar left and right, the vertical potentiometer changes the voltage of the electricity to modify the temperature of the light.

The light is provided by the LED cells on a base.

For charging, the bottom lid is integrated with a circuit for wireless charging when it is put on the independent wireless charger that is connected to plugs with wire. The lamp can be taken away after charging (e.g. the lamp is charged in the living room when the user is reading there and taken to the bedroom when the user wants to go there).

The head is made of high-quality bronze, the top lid is made of natural marble. And the outer shell is made of glass.
Disainiülesanne: The biggest challenge was to build the functional potentiometer and circuit to make this design into reality. In the beginning, it was really hard to link the control action and the change of the brightness and temperature of the light in a proper way. The change always went too much or too little. Finally, we found the balance and created a perfect control feeling.
Uurimistöö: We would like to create an amazing new interaction between the user and the lamp. After a lot of sketches and brainstorming, we came up with this idea and found out that there was not anything like it in the market. So we did five versions of 1:1 scale prototypes to find the best proportion of the shape, enable the potentiometer working, and find the manufacturing process of the marble. It turned out that we need a horizontal and a vertical potentiometer to control the voltage and hence the brightness and temperature of the light. And we found out that the marble can be made by CNC.
Inspiratsioon: Waterlight was inspired by the water faucet which adjusts the volume of water by being turned up and down, and controls the temperature of water by being turned left and right. It enables users to adjust light like using a water faucet, creating a similar feeling between light control and water control, and bringing about more insights into life.
Projekti kestus: This project started in October 2019 and finished in January 2020 in Milan.
Tööprotsess: Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Meeskonnaliikmed: Nitesh Reddy N
Kejun Li