Disainilahendus Obj01 Laualamp, autor Manu Bano

Disainilahendus Obj01 Laualamp, mille autor on Manu Bano, on kõrgelt hinnatud 2021 auhinna Kuldauhind A' Design Award võitja konkursi kategoorias Valgustitoodete ja -tarvikute disain.

KuldValgustus· 2021

Obj01 Laualamp

disainer: Manu Bano

Klient: Manu BaÑÓ

Auhind Kuldauhind A' Design Award kategoorias Valgustus

61,960

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #119451

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Obj01 Laualamp

Obj01 on laualamp, mis on valmistatud ühest töötlemata metallilehest, milleks võib olla teras, roostevaba teras või messing. Leht lõigatakse laseriga ja pannakse käsitsi kokku kummihaamriga, ilma keevisliideteta. Lampi moodustavad lihtsad geomeetrilised kujundid: ristkülik, ring ja silinder, milles paikneb LED-valgusallikas. Väljalõigatud ring muutub lambivarjuks. Metallpind poleeritakse käsitsi ja kaetakse vahaga. Integreeritud puutetundlik dimmer kasutab elektrit juhtivat korpust, nii et mis tahes külje puudutamine lülitab valgust ja reguleerib heledust. Lambi mõõtmed on 38 x 22 x 7 cm.

Tunnustus

Auhinnast Kuldauhind A' Design Award

Obj01 Laualamp on Kuldauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse esmaklassilistele, imelistele ja silmapaistvatele disainidele. Kuldvõitjad on ülimalt uuenduslikud, visioonilised ja glamuurselt pimestavad looming, mis peegeldab oma disainerite geniaalsust, tarkust ja oskusi. Obj01 Laualamp peaks olema kõrgelt kiidetud, suundi seadev ja monumentaalne leiutis, mis pakub enneolematut väärtust. See Kuldauhinna A' Design Award võidudisain on suurejooneline, lugupeetud projekt, mis toob suurt kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Obj01 Laualamp tekitab intensiivset soovi, äratab kirge, julgustab loovust ja lummab meid.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: OBJ-01 is an understandable simple gesture. At a glance, it reveals its material, its manufacturing process, its function and its use. A plate of raw metal cut by laser and assembled by hand with a rubber hammer. Its size responds to the modulation and format of the material in its commercial standards. Pure geometric figures build the lighting fixture; a rectangle, a circle and a cylinder at the back which contains the LED light spot. The circle, when cut out, adopts the function of a screen.
Mõõtmed ja pakend: Dimensions: 38 x 22 x 7 cm
Materials: Steel, Stainless steel or Brass + LED light + custom electronics.
Tootmistehnoloogia: OBJ-01 is made out of sheet of raw metal, that can be steel, stainless steel or brass, cut by laser and assembled by hand with a rubber hammer and no welding joinery. Its size responds to the modulation and format of the material in its commercial standards. It is polished by hand and sealed with wax.
Disainiülesanne: As a product designed and produced during 2020, the biggest challenge was to do everything from home. I am used to working with my hands and visiting many workshops. In this case I had to work with processes and materials I already knew because experimenting became impossible. Eventually I bought some machines to be able to bring the production to my home and to be able to control the quality by myself.
Uurimistöö: On this occasion, there was practically no research, the design process was an exercise of intuition. I decided to reuse the cardboard from online purchases I made during the pandemic and use it as material for mockups. I started working with this cardboard and a knife cutter making different cuts and folds to the cardboard to transform a 2D sheet into a 3D object with different uses. My intention from the beginning was to achieve a small object that I could send flat packed all over the world, so starting the process from a flat sheet was important.
Inspiratsioon: In my day to day life I visit many workshops. In this occasion, as I could not go out to be inspired due to the pandemic, the challenge was to face a blank sheet of paper. I started with complex designs that I gradually discarded due to the impossibility of going to the production workshops. I ended up stripping away the complexity of the design and keeping the essentials. I decided to work just with one material and one industrial process which I was familiar with; metal and laser cutting.
Projekti kestus: I designed the first OBJ-01 prototype during the pandemic in Mexico City in 2020 and I have been producing new pieces since then.
Tööprotsess: OBJ-01 has an integrated custom touch dimmer. As metal is conductive, this system takes advantage of its properties, so when you touch the lamp in any side it turns on/off. The user can also control the LED brightness by tapping the lamp several times. This makes makes for me the object to look more sculptural as you don't need a black metal box with a dimmer close to the lamp to be able to turn it on, it's just the lamp over your sideboard.