Disainilahendus Courbe Vaas, mille autor on Eason Yang, Bryan Leung and Amanda Lin, on kõrgelt hinnatud 2021 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Mööblidisain.
PronksMööbel· 2021
Courbe Vaas
disainer: Eason Yang, Bryan Leung and Amanda Lin
Klient: Tainan University of Technology/Product Design Deparment
Auhind Pronksauhind A' Design Award kategoorias Mööbel
Kinnitatud auhinna võitja
Kinnita auhinna staatus disainile #123289Disain
Teosest Courbe Vaas
Courbe'i vaasi kaunis kumer kuju on valmistatud kahest torukujulisest metalltorust uuendusliku tehnika abil, mis painutavad ja kinnitavad kahte metalltoru tükki, mis on ilma keevitusprotsessita samaaegselt toru teises torus, mis annab ainulaadse lillevaasi ja toimib ka hajutipudelina. Torude kahetooniline kate, must ja kuld, suurendab luksuslikkust.
Tunnustus
Auhinnast Pronksauhind A' Design Award
Courbe Vaas on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Courbe Vaas peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Courbe Vaas rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.
Disaini taustal
Pressimaterjalid
Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.
- Unikaalsed omadused
- Breaking through the original metal bending technology that can only bending sheet metal, by designing different shapes of molds and combining existing bending processing tools, tubular metal can also be bent.
The innovative processing method can bend and clamp two tubular metal pipes at the same time and combine them without any welding technology.
The beautiful curvy shape produced by bending the two pipes which is one pipe within another pipe, become a unique flower vase and also can be a diffuser bottle. - Mõõtmed ja pakend
- Material: 304 stainless steel
Surface treatment: Titanium plating, PVD
Weight: Large 3kg/ Medium 1kg/ Small 350g
Size: (Large) Diameter 90mm x H400mm/(Medium) Diameter70mm x H250mm /(Small)Diameter40mm x H125mm - Sildid
- Curve, Vase ,Metal, PVD, Stainless Steel, Laser Cutting
- Tootmistehnoloogia
- During the production process, the design and manufacturing team worked hard, because the thickness and strength of different metal pipes will cause many variables in the clamping method, and the difference in the clamping operation point will also cause completely different results. Therefore, the entire experiment The working hours with the trial production exceeded 1,200 hours.
- Disainiülesanne
- The fragrance diffused vase exists as quietly as a sculpture. Its simple lines and elegant posture make it impossible to look away from it. Its structure is simple at first glance, but there are no solder joints in the metal pipe, and it is only fixed by the clamping and bending method. In addition to the beauty of each diffused vase, it also contains the brand's uncompromising, breakthrough and pursuit of perfection. The vase can hold essential oils and spread out the favorite scent by spreading the incense sticks. It can also be used as an exquisite flower vessel to provide a beautiful experience for the senses.
- Uurimistöö
- Try to study traditional laser cutting metal processing methods, are there other new possibilities? And hope to be able in combination with new technical methods, it can make traditional metal crafts have artistic value and make people understand metal crafts Have a new imagination in the modern living space.
method:
1. By understanding the processing limitations of metal cutting and trying to break through.
2. Introduce new technology, the laser welding process breaks through metal deformation limits.
3. Design combined with natural imagery and produce craftsmanship Sculpture with art. - Inspiratsioon
- Taking the traditional sheet metal bending process as the starting point, finding ways to break through the traditional limitation on bending sheet metal technique, different shapes and materials taking into account to search for new dimension on metal bending technology in order to create new shape and form, tubular metal were tried.
- Projekti kestus
- 2019 First public display at Dubai Design Week
Dubai Downtown design week
2020,Dec. Officially Launched. - Tööprotsess
- In addition to large, medium and small bending craft flowers, they can be regarded as independent art items, after adding diffused branches and essential oils, it can be even more simple diffuser bottle.
- Meeskonnaliikmed
- Design Director: Eason Yang
Designer: Bryan Leung
Brand manager : Amanda Lin
Instructor: ChungSheng Chen
Douxteel
Censhi Co.,Ltd
Tainan University of Technology/Product Design Dept. - Piltide autorid
- Photo Credit: Eason Yang
Sponsoreeritud
Avasta rohkem kui Designers.org
Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.
Avasta rohkem
Seotud disainid
Avasta rohkem auhinnatud disaine samast kategooriast, valitud kvaliteedi alusel.
