Disainilahendus Sprout Jalgratas, autor JunXiang Cheng and Yi Yang

Disainilahendus Sprout Jalgratas, mille autor on JunXiang Cheng and Yi Yang, on kõrgelt hinnatud 2022 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias 3D-prinditud vormide ja toodete disain.

Raud3D-printimine· 2022

Sprout Jalgratas

disainer: JunXiang Cheng and Yi Yang

Klient: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Auhind Rauaauhind A' Design Award kategoorias 3D-printimine

32,018

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #137286

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Sprout Jalgratas

Sprout on kolmemõõtmelise printimise teel valmistatud jalgratas. Raami kuju kujundatakse topoloogilise optimeerimise abil, mis paigutab materjali ainult sinna, kus seda tegelikult vaja on, vähendades seeläbi kasutatava materjali üldkogust. Lõplike elementide meetodil tehtud staatiline pingeanalüüs kinnitab raamikonstruktsiooni stabiilsust. Lõplik mudel prinditakse suure tihedusega nailonist. Jalgratta pikkus on 1630 mm, laius 600 mm ja kõrgus 832 mm. Printimine kõrvaldab vajaduse kulukate vormide järele, mistõttu iga raam võib järgida individuaalset disaini.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Sprout Jalgratas on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Sprout Jalgratas peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Sprout Jalgratas on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Mõõtmed ja pakend: Length 1630mm, width600mm, height 832mm
Sildid: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Tootmistehnoloogia: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Disainiülesanne: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Uurimistöö: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiratsioon: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Projekti kestus: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Tööprotsess: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Meeskonnaliikmed: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao