Disainilahendus Luf Seemikualus, autor Industrial Design College of LAFA

Disainilahendus Luf Seemikualus, mille autor on Industrial Design College of LAFA, on kõrgelt hinnatud 2023 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Jätkusuutlike toodete, projektide ja roheline disain.

RaudJätkusuutlik toode· 2023

Luf Seemikualus

disainer: Industrial Design College of LAFA

Klient: LuXun Academy of Fine Arts

Auhind Rauaauhind A' Design Award kategoorias Jätkusuutlik toode

24,662

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #148786

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Luf Seemikualus

Luf on lambaläätsakiust valmistatud seemikualus. Luf asendab plasttopsid biolagunevast materjalist alusega, mis on vormitud purustatud lambaläätsast, biopõhisest liimainest ja kõvendist, mida vormis kuumutatakse ja pressitakse. Alused pinutakse üksteise peale, nii et üks inimene saab korraga kanda enam kui viit alust. Iga alus on jagatud kolmeks iseseisvaks osaks ja seda saab lõigata mööda märgitud jooni. Pärast seemikute küpsemist istutatakse alus koos taimega mulda, kus see laguneb toitaineteks. Lambaläätsa seemneid saab koguda ja kasutada edasiseks kasvatamiseks.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Luf Seemikualus on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Luf Seemikualus peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Luf Seemikualus on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The development model of converting plastic seedling trays "from cradle to grave" to loofah biodegradable trays "from cradle to cradle". Break the loofah and hot-press glutinous rice glue to synthesize new materials. The trays can be interspersed up and down and a single person can carry more than five trays at a time. Transplanted into the soil and degraded into nutrients. The chassis can be reused or dried for crops, and the loofah seeds can also be recycled to continue seedling cultivation.
Mõõtmed ja pakend: Width 800mm x Depth 490mm x Height 70mm，The size of the hole plate is 540 mm*280 mm. Vegetable seedlings generally use 50 to 288holes. The shape of the holes is round or square, generally between 0.6 and 1.2 mm.
Sildid: Loofah, seedling tray, transportation, rural revitalization strategy, sustainable design
Tootmistehnoloogia: Prepare 50 parts of loofah fiber, 15 parts of bio-based green adhesive, 1 part of curing agent, and 2 parts of ethanol diluent in the weight ratio, and heat the prepared materials in the mold at 20 °C to 0.2 MPa for 60 min. The finished product has been tested for load-bearing, water seepage, stretching, and degradation. After the loofah is crushed and combined with other green raw materials, it can form a block shape, which meets the basic standards for seedling trays.
Disainiülesanne: Applying the loofah material of agricultural waste to seedling trays, from the perspective of circular design, it is necessary to meet the functionality while conforming to the sustainable design theory, and give full play to the social, cultural and commercial values of agricultural waste in the design. New rural construction under the strategy of rural revitalization. It should be explored whether this material can be directly applied to 3D printing to make more finished products.
Uurimistöö: (1)Clean up the loofah fiber to remove impurities (2) Dry the loofah fiber (3) Add binder and diluent to the dried loofah fiber and stir fully to make a premix (4) Mix well The final premix is added with curing agent and then fully stirred as a preparation (5) Heat the preparation in the mold at 20°C to 0.2MPa and pre-press for 60min (6) Heat at 20°C and press at 40MPa for 10min The finished product is obtained.
Inspiratsioon: In China's vigorous implementation of the rural revitalization strategy, the scale of agricultural production has expanded, leading to an increase in crop residues. With the advantages of high yield and degradability of loofah, it has been widely used in the field of seedling cultivation along with the "C2C" concept. Large-scale nursery bases are mechanized facilities and are not suitable for rural areas. Natural materials used in plant cultivation are finally back to nature.
Projekti kestus: The project started in May 2022 and finished in January 2023 in Lu Xun Academy of Fine Arts.
Tööprotsess: Establish a closed cycle metabolic process of "production-recovery-remanufacture" of raw materials. The chassis of the whole seedling can be carried by a single person according to the weight of more than 5 trays, which are divided into three independent trays. After the plant seedlings are mature, they are transplanted into the soil, and can be cut as a whole or along the dotted line to be transplanted as independent individuals. After transplanting, they will soon decompose into the soil.
Meeskonnaliikmed: Designer: Du Heli
Designer: Jia Zhuohang
Designer: Xue Bomu
Piltide autorid: Image #1: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #2: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #3: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #4: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #5: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023