Disainilahendus Loop Küünlajalg, autor Zeynep and Konstantinos Paradeisopoulos

Disainilahendus Loop Küünlajalg, mille autor on Zeynep and Konstantinos Paradeisopoulos, on kõrgelt hinnatud 2024 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Kodutarvete disain.

RaudKodutarbed· 2024

Loop Küünlajalg

disainer: Zeynep and Konstantinos Paradeisopoulos

Klient: Kazoo Design

Auhind Rauaauhind A' Design Award kategoorias Kodutarbed

18,697

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #157357

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Loop Küünlajalg

Loop küünlajalg, mis on nimetatud oma eripärase disaini järgi, koosneb kolmest omavahel ühendatud silmusest, mis moodustavad tugeva aluse kõrge küünla jaoks. Küünalt hoidev püstine silmus lisab terviklikule esteetikale elegantse puudutuse. Vaha pindadele tilkumise vältimiseks on selle küünlajala jaoks spetsiaalselt disainitud sobiv alus. See alus püüab kinni mitte ainult liigse vaha, vaid toimib ka eraldiseisva kodukaunistusena, kui seda ei kasutata. Loop küünlajalg ja alus moodustavad ühtse ning visuaalselt atraktiivse komplekti, mis on nii funktsionaalne kui ka stiilne.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Loop Küünlajalg on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Loop Küünlajalg peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Loop Küünlajalg on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The Loop candleholder, inspired by the concept of infinity, boasts a unique design that allows it to sit steadily on a coffee table while emitting captivating infinite loop shadows onto the surface below. The candleholder's elegant tray serves a dual purpose, not only catching any wax that drips but also functioning as a standalone decorative item for jewelry storage.
Mõõtmed ja pakend: Candleholder dimensions are 160mm x 160mm x 90mm
Sildid: candleholder, tall candleholder, home decor, product design, candleholder with tray, home decoration
Tootmistehnoloogia: The design's initial prototype had been created on the computer, but the true challenge lay in transitioning a 3D digital product into physical production. Thus, the design of the mold posed as much of a challenge as the object itself.
Disainiülesanne: The mold of the Loop Candleholder has been quiet a challenge since there are three big loops that are the main legs and a perpendicularly placed fourth loop that houses the candle. Therefor the mold consists of five pieces that come together and it takes crafty hands to remove each copy without damaging the pieces.
Uurimistöö: Most of the geometrical design challenges were solved on the computer, digitally first. The angle of how the curves transition into the fourth loop that houses the tall candle were carefully studied and tested well so that the candle would sit stably when pushed in.
Inspiratsioon: The Loop Candleholder draws inspiration from the infinity symbol, translating its geometric form into a modern home accessory. The challenge of this project was to connect three loops with each other while creating a fourth loop in the center to house a tall candleholder.
The accompanying tray serves as a surface for the candleholder's melted wax and highlights the design's geometrical twists in the corners, adding an accentuating touch to the overall aesthetic.
Projekti kestus: The project took 200 hours until completion. The design was first started on a 3D application on the computer later printed to size and the prototype was well finessed so that the silicon mold could capture all the details. The silicon mold is based of 5 parts that are secured with 3D printed parts and bolts.
Tööprotsess: Loop candleholder can be easily transferred by holding one of the loops and positioning it on a table. It transforms the space with it's geometrical aesthetics and when lit creates various nice loop shadows on the surface it is placed on.
Patendid: Patent File Number: 2021/004916
Patent Application Date: 15.04.2021
Patent Holder: Zen Crafts İç ve Dış Ticaret A.Ş.
Meeskonnaliikmed: Konstantinos Paradeisopoulos
Zeynep Önder Paradeisopoulos
Piltide autorid: Konstantinos Paradeisopoulos
Zeynep Önder Paradeisopoulos