Disainilahendus Ydin Stool Järi, mille autor on Franck Divay, on kõrgelt hinnatud 2014 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Mööblidisain.
HõbeMööbel· 2014
Ydin Stool Järi
disainer: Franck Divay
Klient: Inoow Design
Auhind Hõbeauhind A' Design Award kategoorias Mööbel
Kinnitatud auhinna võitja
Kinnita auhinna staatus disainile #30329Disain
Teosest Ydin Stool Järi
Ydini tabureti saab tänu lihtsale blokeerimissüsteemile ise paigaldada ilma spetsiaalseid tööriistu kasutamata. 4 identset jalga ei asetata mingis kindlas järjekorras ja nurgakivina toimiv betoonistmik hoiab kõik paigas. Jalad on valmistatud treppide tootjalt pärit vanarauaga, traditsiooniliste puidutöötlemismeetodite abil hõlpsasti töödeldavad ja lõpuks õlitatud. Iste on lihtsalt valatud vastupidavast kiududega armeeritud UHP betoonist. Ainult 5 lahtivõetavat osa, mis tuleb lahtiselt pakkida ja valmis lõpptarbijale saata, on veel üks jätkusuutlikkuse argument.
Tunnustus
Auhinnast Hõbeauhind A' Design Award
Ydin Stool Järi on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Ydin Stool Järi peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Ydin Stool Järi on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.
Disaini taustal
Pressimaterjalid
Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.
- Unikaalsed omadused
- Ydin stool can be mounted without using special tools, thanks to a simple interlocking system. The 4 identical feet are placed in no particular order and the concrete seat, acting as the keystone, keeps everything in place. Easily machined feet are made with scrap wood coming from a stairs manufacturer and finally oiled. The seat is moulded in a lasting fiber-reinforced concrete. Only 5 dissociable parts to be flat packed and ready to be shipped, is another sustainability argument.
- Mõõtmed ja pakend
- Product dimension : 310 x 310 x 440 mm
Product weight : 5,3 kg - Sildid
- stool, furniture, wood, concrete, scandinavian, moulding, flatpack, interlocking, sustainable, seating,
- Tootmistehnoloogia
- For a good fitting assembly, the hole dimensions in the center of the seat had to be extremely precise. So the mould has been made by using a 3D printed model. Then, the concrete seat remains raw from mold release. Feet are made with traditional woodworking technique by using several jigs or machining setups. With only 1 kind of piece to be shaped, it gives a very good process optimization when you start to manufacture several units. Scrap wood is the only raw material used for making them.
- Disainiülesanne
- The biggest challenge has been the technical and formal assembly development. The positioning of the 4 wooden feet one to each other, first. And secondly, the base interlocking into the seat. While having to meet the production capacities of a craft workshop.
- Uurimistöö
- Project started with the desire to work with Ultra High Performance Concrete (UHPC), without knowing what kind of product was going to be obtained in the end. Soon, the choice to combine concrete with wood seemed to be the way not to get a single monobloc object that could just have been in molded plastic. Technical characteristics offered by this concrete, have allowed to develop an assembly principle that would not be possible to achieve with other materials, in a craftsmanship context.
- Inspiratsioon
- The idea of a stool comes by experimenting with Ultra High Performance Concrete (UHPC) moulding possibilities. The final drawing of the furniture has been inspired by Scandinavian design culture.
- Projekti kestus
- The stool development was spread over two years, but not as a full-time job. This is an internal project that came to life between the requests performed to several customers.
- Tööprotsess
- With the fitting mounting system of the Ydin stool, the disadvantages of a furniture kit are deleted. No hardware need that requires the use of tools. Feet nesting is carried in an instinctive way without the need for a manual. The assembly principle is idealized in the middle of the seat and participates in the overall aesthetics of the piece of furniture.
Sponsoreeritud
Avasta rohkem kui Designers.org
Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.
Avasta rohkem
Seotud disainid
Avasta rohkem auhinnatud disaine samast kategooriast, valitud kvaliteedi alusel.
