Disainilahendus Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera, autor Chris Dopp & Travis Baldwin

Disainilahendus Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera, mille autor on Chris Dopp & Travis Baldwin, on kõrgelt hinnatud 2015 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Turva-, ohutus- ja jälgimistoodete disain.

HõbeTurvatooted· 2015

Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera

disainer: Chris Dopp & Travis Baldwin

Klient: Vista Imaging and Crea Inc Design LTD

Auhind Hõbeauhind A' Design Award kategoorias Turvatooted

25,961

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #40052

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera

Vista EY2T on motoriseeritud biomeetrilise tuvastamise kaamera silmaiirise ja näotuvastuse jaoks. Seade skannib vaatevälja nägude leidmiseks, seejärel pööravad mootorid kaamera silmadele suunatuks. Lai infrapuna-LED-ide levik ja automaatse fookuse süsteem võimaldavad pildistamist 3 kuni 6 jala kauguselt, mistõttu käsitsi sihtimist pole vaja. Üheksa esiandurit on ühendatud ühtse musta pinna taha ning silinderjas pillikujuline vorm ümarate otstega loob rahuliku ja mitteähvardava ilme. Kaamerat saab kasutada iseseisvalt või seinakinnitusega.

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Vista EY2T Motoriseeritud biomeetrilise tuvastamise kaamera on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Mõõtmed ja pakend: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Sildid: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Tootmistehnoloogia: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Disainiülesanne: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Uurimistöö: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspiratsioon: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Projekti kestus: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Tööprotsess: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Meeskonnaliikmed: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Piltide autorid: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015