Disainilahendus Carbon Activated Timber Bench Pink, autor Michael Budig and Kenneth Tracy

Disainilahendus Carbon Activated Timber Bench Pink, mille autor on Michael Budig and Kenneth Tracy, on kõrgelt hinnatud 2020 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Jätkusuutlike toodete, projektide ja roheline disain.

PronksJätkusuutlik toode· 2020

Carbon Activated Timber Bench Pink

disainer: Michael Budig and Kenneth Tracy

Klient: Singapore University of Technology and Design

Auhind Pronksauhind A' Design Award kategoorias Jätkusuutlik toode

23,098

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #89216

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Carbon Activated Timber Bench Pink

Carbon Activated Timber Bench on mõeldud avalikesse ruumidesse ja valmistatud taaskasutatud puitlaudadest. See seab kahtluse alla kaalu ja stabiilsuse mõisted. Kuigi puitlaudade maht mõjub näiliselt massiivsetena plokidena, on need vaid lahtiselt ühendatud ja ebastabiilses seisundis. Peenikesed süsinikukiu niidid seovad massivsed plokid kokku, andes neile stabiilsuse. Need tugevdavad ka plokke, lisades puitlaudadele veelgi tugevust.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Carbon Activated Timber Bench Pink on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Carbon Activated Timber Bench Pink peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Carbon Activated Timber Bench Pink rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The bench uses reclaimed wood planks that through their re-application continue to store carbon, since the living trees absorb CO2 from the environment. The re-use of the wood hence contributes to a positive ecological balance. Carbon is re-combined with the wood in a different state, as minimal amounts of high tech fibres that are strategically placed to enhance the capacity of the wood planks.
Mõõtmed ja pakend: Dimensions: 3000 x 830 x 400 mm
Volume: 0.1736 m3
Mass: 128 kg of reclaimed hardwood from outdoor deckings
Carbon fibers, total mass: 0.623 kg (around 800m of 12k carbon fibre tow)
Sildid: Reclaimed wood, carbon fibres, robotic milling, traditional crafts
Tootmistehnoloogia: The bench reflects craftsmanship in a contemporary context, where computational design and fabrication have become state of the art. After stacking reclaimed wood planks into solid blocks, an industrial robotic arm mills the blocks into their final geometries with paths for the subsequent reiforcement with fibres. The reclaimed wood planks store carbon and contribute to a positive ecological balance, whereas carbon is re-combined as minimal amounts of high tech fibres, strategically placed to enhance the capacity of the wood planks.
Disainiülesanne: Reclaimed wood simultaneously diverts waste and reduces the energy by forgoing the effort needed to obtain virgin materials. The finishing and fabrication contribute to making a durable, robust piece of furniture sequestering carbon for longer and reducing the need for replacements. Finally augmenting the performance of wood beyond its inherent structural capacity increases the potential range of use so it can be used differently for both industrial design and architecture.
Uurimistöö: The bench design highlights the expertise present in large-scale furniture carpentry in a combination of experienced labor with new forms of craft, digital calibration and robotic fabrication. By augmenting the reclaimed wood with carbon fibers, the project proves that small amounts of high-performance materials can be used alongside carbon-negative wood elements. This new design direction increases productivity and sustainability through the use of new design and manufacturing technologies.
Inspiratsioon: Juxtaposing old, weathered hardwood with precise smooth carving and high-tech carbon fiber gives the piece a unique character. This novel expression fuses high tech carving, patina, natural wood grain, digitally designed weaving patterns and precise manufacturing. This points towards an optimized, calibrated future of sustainable design and recalls vernacular traditions of textile and wood construction. Lashing, wood joinery and timber frames act as both cultural and technological precedents.
Projekti kestus: Conversations started in late December 2016, and the design was completed in November 2018 and installed on the grounds of Mapletree Business City 2, Singapore
Tööprotsess: Initiated by the opportunity to reuse wood decking boards the project leverages high performance materials and new techniques to renew the old materials and create a sustaining piece of furniture. An elongated pattern of tightly wound carbon fiber strands rest within robotically carved groves to hold the massive stack of blocks together. Precise, continuous curvature combined with tapered edges form a comfortable low-profile object that looks lightweight despite being 140kg
Meeskonnaliikmed: Principal Designer: Michael Budig
Principal Designer: Kenneth Tracy
Sachin Gupta
Kerine Kua
Dhileep Kumar
Lee Le Xiu Jean
Melissa Lee Wen Hui
Seah Jia Neng
Daniel Yong Kaijie
Robotic Fabricator: Singapore Composite Cluster
Wood Fabricator: Hon Nam Lee
Piltide autorid: Michael Budig and Kenneth Tracy, Singapore University of Technology and Design