Disainilahendus Walk Of Mind Kingad, autor Hadar Slassi

Disainilahendus Walk Of Mind Kingad, mille autor on Hadar Slassi, on kõrgelt hinnatud 2020 auhinna Kuldauhind A' Design Award võitja konkursi kategoorias Jalatsite, kingade ja saabaste disain.

KuldJalatsid· 2020

Walk Of Mind Kingad

disainer: Hadar Slassi

Klient: Walk of Mind

Auhind Kuldauhind A' Design Award kategoorias Jalatsid

88,494

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #89876

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Walk Of Mind Kingad

Walk of Mind on kingapaar, mis ühendab digitaalse valmistamise traditsioonilise käsitööga. Konstruktsioon koosneb viiest kihist, mida nimetatakse strataadeks. Kolm strataat on 3D-prinditud nailon 12 polümeerist selektiivse lasersünterdamise abil. Ülejäänud strataad on märgvormitud taimparknahast. Strataad lukustuvad omavahel geomeetriliselt ja ühendatakse käsitsi õmblemisega. Iga paar saab alguse jalalaba digitaalsest skaneeringust, mistõttu on istuvus personaalne. Kingad on kerged ja vastupidavad ning meetod vähendab naha kasutust 80 protsenti.

Tunnustus

Auhinnast Kuldauhind A' Design Award

Walk Of Mind Kingad on Kuldauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse esmaklassilistele, imelistele ja silmapaistvatele disainidele. Kuldvõitjad on ülimalt uuenduslikud, visioonilised ja glamuurselt pimestavad looming, mis peegeldab oma disainerite geniaalsust, tarkust ja oskusi. Walk Of Mind Kingad peaks olema kõrgelt kiidetud, suundi seadev ja monumentaalne leiutis, mis pakub enneolematut väärtust. See Kuldauhinna A' Design Award võidudisain on suurejooneline, lugupeetud projekt, mis toob suurt kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Walk Of Mind Kingad tekitab intensiivset soovi, äratab kirge, julgustab loovust ja lummab meid.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The strata compound method bridges gaps between modern digital technology and old-world craftsmanship. The project combines additive manufacturing 3D printed SLS mold of natural web cracked earth patterns, together with traditional wet molding vesicle forms (bumps), while weaving together nylon 12 polymer and vegetable-tanned leather. The shoe structure strength is acquired by all five stratas compound together creating a geometric lock enhanced by hand sewing. The design process begins with personal customization by using a digital scan of a certain foot.
Mõõtmed ja pakend: width 90 x depth 260 x height 100
Sildid: 3D Print, SLS Print, Digital Craft, Wet Molding, Shoe Design, Vegetable tanned Leather, geological strata, Comfort Shoe Design, Bezalel Academy
Tootmistehnoloogia: The design process starts with very detailed planning at the digital stage taking into consideration all the aspects of binding all the stratas together. It requires a wide overview combined with detailed specifications to allow a precise assembly. The shoe design is a compound of 5 stratas. Triple of them designed on rhino software and grasshopper cod and printed in the SLS technique using nylon 12 polymer. Those stratas exactly match each other while taking into consideration the non-printed stratas (wet molded, vegetable-tanned leather pieces) that are compound afterward as well.
Disainiülesanne: The design process starts with very detailed planning right from the beginning taking into consideration all the aspects of binding all the stratas together. A wide overview and detailed specifications are required. The biggest challenge the designer faced, was cognitive. The need to think in advance of all the details of each of the shoe stratas from the sketch stage up until the digital stage.
Uurimistöö: Walk of mind project started and was inspired by the designer's early research on shoes and feet at Judaism. At the beginning the material research was all about traditional craftwork, trying to manipulate and encouraging the material into new horizons. Hadar's desire was designing shoes that will have a natural bond to the feet and also to the ground. The strata compound method at first was created as a Design solution and afterward developed to be an Innovative design methodology.
Inspiratsioon: Walk of mind pioneers shoe hybrid fabrication design concept and explores a new approach to shoe design accompanied with new terminology. Using an originative shoe layering strata Compound method that retraces the known base hierarchy of function and shape in Shoe layers. Walk of mind shoes is a compound of five stratas. Strata - a geological term describe the fundamental earth unit. Hadar uses it to replace the known term in shoes - layer. The project started and was inspired by early research on Shoes and feet at Judaism, relying on spiritual yet earthly ground, the project allows the designer to inner examine her heritage and its values.
Projekti kestus: Walk of mind was created between December 2019 - June 2019, as part of the designer final project from her BA. studies at Bezalel academy of arts and design at the jewelry and fashion department in Israel.
Tööprotsess: Walk of mind has some notable advantages: The design begins with personal customization by using a digital scan of a certain foot. The shoes are very light - yet durable due to the skeleton they consist of and the leather compounding method. 3D printing allows using only the material you need with almost zero waste. The compounding method reduces the use of leather by 80 %: first, by using 3D printed stratas that form the skeleton of the shoe, second, by using small pieces of leather that enable wider usage of the same Raw material sheet of leather.
Piltide autorid: Image #1 Yael Moscovich, Image #2 Yael Moscovich, Image #3 Alon Morovich, Image #4 Alon Morovich, Image #5 Alon Morovich
Video Credits: Yael Moscovich