Uavi Technology diseinatzailearen Airwood Drone Kita

Uavi Technology diseinatzailearen Airwood Drone Kita lana 2020 Burdinazko Saria A' Design Award sari ospetsuaren irabazle bikaina da Jostailu, Joko eta Zaletasun Produktuen Diseinua Lehiaketa Kategorian.

BurdinaJostailua· 2020

Airwood Drone Kita

diseinatzailea: Uavi Technology

Bezeroa: UAVI Technology (Shen Zhen) Limited

Burdinazko Saria A' Design Award Irabazlea Jostailua Kategorian

17,987

Egiaztatutako Sari Irabazlea

#103852 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Airwood Drone Kita Diseinuari Buruz

Airwood haurrentzat eta helduentzat diseinatutako muntaia-drone kit bat da. Lau ardatzeko droneak zurezko konpositezko taula batez egindako egitura darabil, laser-mozgailu batekin bi milimetroko zati mehetan mozturik. Erabiltzaileek eskuz muntatzen dituzte zurezko taulak eta osagai elektronikoak, hala dronea nola urrutiko agintea eraikitzeko. Kontrolagailu, motor eta bateria modularrek egitura eta itxura ugari sortzeko aukera ematen dute multzo bakar batetik. Droneak barruko flotatzea, argazkigintza aereoa eta programazio grafikoa onartzen ditu. Ziurtatutako zurak plastikoaren eta metalaren erabilera murrizten du.

Aintzatespena

Burdinazko Saria A' Design Award Sariari Buruz

Airwood Drone Kita Burdinazko Saria A' Design Award irabazlea da, ondo diseinatutako sorkuntzetatik espero diren eskakizun profesional eta industrialak betetzen dituzten diseinu onei ematen zaien aitorpen prestijiotsua. Burdin-mailako irabazleek beren sortzaileen trebetasun handia, espezializazio handia, adituen ulermena eta sormen-gaitasuna erakusten dituzte. Airwood Drone Kita oso estimatua, miretsia eta maitea den sorkuntza izatea espero da, praktikoa eta berritzailea dena. Burdinazko Saria A' Design Award irabazi duen diseinu honek sektoreko praktika onenak integratzen ditu eta know-how-ari eta talentuari lotutako ezaugarri tekniko gaituak ditu. Airwood Drone Kita zehaztasunagatik errespetatua den lana da, eta mundua leku hobea egiten laguntzen duten bizi-kalitatearen hobekuntzak eskaintzeko diseinatua dagoena.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Neurriak eta Ontziratzea: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Etiketak: Drone, Wood, DIY, Modularity, Programmable
Produkzio Teknologia: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Diseinu Erronka: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Ikerketa: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspirazioa: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Proiektuaren Iraupena: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Eragiketa Fluxua: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patenteak: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Irudi Kredituak: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.