Scott Flett diseinatzailearen The Flett Teilatu Ertz-babesa

Scott Flett diseinatzailearen The Flett Teilatu Ertz-babesa lana 2023 Burdinazko Saria A' Design Award sari ospetsuaren irabazle bikaina da 3D Inprimatutako Forma eta Produktuen Diseinua Lehiaketa Kategorian.

Burdina3D Inprimatzea· 2023

The Flett Teilatu Ertz-babesa

diseinatzailea: Scott Flett

Bezeroa: Scott Flett Architecture Workshop.

Burdinazko Saria A' Design Award Irabazlea 3D Inprimatzea Kategorian

34,956

Egiaztatutako Sari Irabazlea

#141650 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

The Flett Teilatu Ertz-babesa Diseinuari Buruz

Flett-a jarraitutako junturako estaldura arkitektonikorako diseinatutako teilatu ertz-babesa da. Ertz-babesa 3D inprimaketa bidez ekoizten da ASA plastikoz, 265 bider 50 bider 100 milimetro neurtzen ditu eta 2 milimetro lodi da. Formak estaldura xafla baten azpian sartzen da, norabide aldaketa bat ahalbidetzen du, eta ondoren hurrengo xaflaren gainean kokatzen da. Pieza teilatuko xaflaren profil eta koloreari egokitua dago, eta materiala termikoki egonkorra, UV izpien aurrean egonkorra eta ez-toxikoa da. Ertz-babesa sekuentzian instala dezakete langile orokorrek, eta teilatuko juntura zailetan ihesak murriztea du helburu.

Aintzatespena

Burdinazko Saria A' Design Award Sariari Buruz

The Flett Teilatu Ertz-babesa Burdinazko Saria A' Design Award irabazlea da, ondo diseinatutako sorkuntzetatik espero diren eskakizun profesional eta industrialak betetzen dituzten diseinu onei ematen zaien aitorpen prestijiotsua. Burdin-mailako irabazleek beren sortzaileen trebetasun handia, espezializazio handia, adituen ulermena eta sormen-gaitasuna erakusten dituzte. The Flett Teilatu Ertz-babesa oso estimatua, miretsia eta maitea den sorkuntza izatea espero da, praktikoa eta berritzailea dena. Burdinazko Saria A' Design Award irabazi duen diseinu honek sektoreko praktika onenak integratzen ditu eta know-how-ari eta talentuari lotutako ezaugarri tekniko gaituak ditu. The Flett Teilatu Ertz-babesa zehaztasunagatik errespetatua den lana da, eta mundua leku hobea egiten laguntzen duten bizi-kalitatearen hobekuntzak eskaintzeko diseinatua dagoena.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
Neurriak eta Ontziratzea: 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile.
Etiketak: roof, flashing, roof flashing, 3d print, 3d printing, additive forming
Produkzio Teknologia: The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent.
Diseinu Erronka: Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
Ikerketa: The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem.
Inspirazioa: Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
Proiektuaren Iraupena: The project started on January 2017 and is ongoing.

The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.

The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.

I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'.
Eragiketa Fluxua: I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.

The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations.
Patenteak: Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop

Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728
Taldekideak: Scott Flett
Irudi Kredituak: Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo