Nobuaki Miyashita diseinatzailearen Aida Sekkei Precut Fabrika

Nobuaki Miyashita diseinatzailearen Aida Sekkei Precut Fabrika lana 2024 Urrezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Arkitektura, Eraikin eta Egitura Diseinua Lehiaketa Kategorian.

UrreArkitektura· 2024

Aida Sekkei Precut Fabrika

diseinatzailea: Nobuaki Miyashita

Bezeroa: Aida Sekkei Co., Ltd.

Urrezko Saria A' Design Award Irabazlea Arkitektura Kategorian

150,107

Egiaztatutako Sari Irabazlea

#160159 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Aida Sekkei Precut Fabrika Diseinuari Buruz

Aida Sekkei-ren fabrika plan berriak egurren aurreapainketan du fokua. Bere kontzeptua egurren prozesatze-sekuentzia gorpuzten duen arkitektura bat sortzean datza. Fabrikaren barruan beiraz inguratutako pasabide flotagarri bat dauka, gutxi gorabehera 100 metro luzekoa, bisitariek aurreapainketa-prozesu osoa hurbileko ikusteko diseinatua. Bulego-eraikinak espazio handiak ditu, ertz ahuleko materialez egindako abaraskiekin, egurrezko etxeetan azpimaterial gisa erabili ohi direnak. Diseinuak elementu guztiak integratzen ditu erakusleiho-fabrika bat sortzeko, ikusgarritasuna eta erakarmen estetikoa azpimarratuz alderdi guztietan.

Aintzatespena

Urrezko Saria A' Design Award Sariari Buruz

Aida Sekkei Precut Fabrika Urrezko Saria A' Design Award irabazlea da, lehen mailako, zoragarriak eta nabarmenak diren diseinuei ematen zaien aitorpen izugarri prestijiotsua. Urre-mailako irabazleak berrikuntzaz beteriko, ikuspegi handiko eta distiraz liluragarriak diren sorkuntzak dira, beren diseinatzaileen genioa, jakituria eta trebetasuna islatzen dutenak. Aida Sekkei Precut Fabrika oso goraipatua, joera-markatzailea eta monumentala den asmakizuna izatea espero da, balio aurrekaririk gabea eskaintzen duena. Urrezko Saria A' Design Award irabazi duen diseinu hau proiektu ikusgarri eta errespetatua da, artearen, zientziaren, diseinuaren eta teknologiaren mugak oso onuragarriro zabaltzen dituena. Aida Sekkei Precut Fabrika desira-sentimendu biziak sortzen dituen, grina pizten duen, sormena bultzatzen duen eta liluratzen gaituen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Neurriak eta Ontziratzea: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Etiketak: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Produkzio Teknologia: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Diseinu Erronka: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Ikerketa: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspirazioa: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Proiektuaren Iraupena: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Eragiketa Fluxua: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patenteak: None
Irudi Kredituak: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020