Kiyoshi Sugimoto diseinatzailearen Wedge House Bizitegia

Kiyoshi Sugimoto diseinatzailearen Wedge House Bizitegia lana 2025 Brontzezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Arkitektura, Eraikin eta Egitura Diseinua Lehiaketa Kategorian.

BrontzeArkitektura· 2025

Wedge House Bizitegia

diseinatzailea: Kiyoshi Sugimoto

Bezeroa: Masato Ikuta

Brontzezko Saria A' Design Award Irabazlea Arkitektura Kategorian

13,244

Egiaztatutako Sari Irabazlea

#162815 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Wedge House Bizitegia Diseinuari Buruz

Wedge House Japoniako Ikeda hirian, malda handiko lursail estu batean eraikitako hiru solairuko bizitegia da. Ziri formako sekzioak solairurik handiena goian eta txikiena lurrazpian kokatzen ditu, horrela ez baitzaio indar gehigarririk eransten euste-horma zahar bati. Goiko bi solairuak zurezkoak dira, eta sotoa, berriz, hormigoi armatuzkoa. Ekialdeko eta mendebaldeko hormak zilarrezko estaldura duten altzairuzko xaflekin akabatuta daude, hegan egiten duen solairua eusten dutenak eta hegoaldera begirako ikuspegia markatzen dutenak. Bigarren solairuko egongela terraza batera irekitzen da, ikuspegi zabala eskaintzen duena.

Aintzatespena

Brontzezko Saria A' Design Award Sariari Buruz

Wedge House Bizitegia Brontzezko Saria A' Design Award irabazlea da, sormenak, asmamenak eta zorroztasunak bereizten dituzten diseinu bikainei ematen zaien aitorpen oso prestijiotsua. Brontze-mailako irabazleak trebetasunez beteriko eta nabarmenki sortzaileak diren artefaktuak dira, beren diseinatzaileen esperientzia zabala, irudimena eta ekimena egiaztatzen dutenak. Wedge House Bizitegia oso estimatua, miretsia eta maitea den objektua izatea espero da, nabarmenki profesionala eta berritzailea dena. Brontzezko Saria A' Design Award irabazi duen diseinu honek artearen, zientziaren, diseinuaren eta teknologiaren praktika onenak biltzen ditu eta xehetasunei ematen dien arretagatik bikaina da. Wedge House Bizitegia beharrak bikain asetzen dituen, desirak ukitzen dituen, sentimenduak xarmatzen dituen eta jakin-mina erakartzen duen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
Neurriak eta Ontziratzea: Total floor area 111.16㎡　Width 5560mm x Depth 11000mm x Height 10190mm
Etiketak: Slopingland structure protruding structure wedge Basement mountainside
Produkzio Teknologia: The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
Diseinu Erronka: Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
Ikerketa: Research on stable structures with protruding shapes in wooden buildings
Inspirazioa: The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
Proiektuaren Iraupena: Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
Eragiketa Fluxua: A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
Taldekideak: KIYOSHI SUGIMOTO
Irudi Kredituak: All photos and videos Hirofumi Imanishi