John G Williams diseinatzailearen Repose Aisialdi Aulkia

John G Williams diseinatzailearen Repose Aisialdi Aulkia lana 2019 Burdinazko Saria A' Design Award sari ospetsuaren irabazle bikaina da Altzari Diseinua Lehiaketa Kategorian.

BurdinaAltzariak· 2019

Repose Aisialdi Aulkia

diseinatzailea: John G Williams

Bezeroa: John G Williams Fine Furniture

Burdinazko Saria A' Design Award Irabazlea Altzariak Kategorian

14,013

Egiaztatutako Sari Irabazlea

#75298 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Repose Aisialdi Aulkia Diseinuari Buruz

Repose zur egur trinkozko aisialdi aulki bat da. Egitura amerikar lizarrezkoa da, eta eserlekua eta bizkarraldea amerikar intxaurrondozkoak dira. Eserleku kurbatu sakona egurrezko pieza formatuak ertz angeludunekin laminatuz osatzen da, upelak eraikitzeko erabiltzen den kuperajearen metodoaren bertsio muturreko bat baliatuz. Barne-kurbak tresneria pertsonalizatuarekin leundu eta mekanizatzen dira, besaulkien goialdeek berriz, ehundura segmentatua mantentzen duten bitartean. Atzeko hankak lurrunez tolestuak dira eta besoak egonkortzen laguntzen dute. Zulo-tenoi lotura motak (draw bore) sendotasuna gehitzen dio. Helburua zur trinkoa soilik erabiliz aulki tapizatu baten erosotasuna lortzea izan zen.

Aintzatespena

Burdinazko Saria A' Design Award Sariari Buruz

Repose Aisialdi Aulkia Burdinazko Saria A' Design Award irabazlea da, ondo diseinatutako sorkuntzetatik espero diren eskakizun profesional eta industrialak betetzen dituzten diseinu onei ematen zaien aitorpen prestijiotsua. Burdin-mailako irabazleek beren sortzaileen trebetasun handia, espezializazio handia, adituen ulermena eta sormen-gaitasuna erakusten dituzte. Repose Aisialdi Aulkia oso estimatua, miretsia eta maitea den sorkuntza izatea espero da, praktikoa eta berritzailea dena. Burdinazko Saria A' Design Award irabazi duen diseinu honek sektoreko praktika onenak integratzen ditu eta know-how-ari eta talentuari lotutako ezaugarri tekniko gaituak ditu. Repose Aisialdi Aulkia zehaztasunagatik errespetatua den lana da, eta mundua leku hobea egiten laguntzen duten bizi-kalitatearen hobekuntzak eskaintzeko diseinatua dagoena.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
Neurriak eta Ontziratzea: W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength
Etiketak: Lounge, chair, wooden, artisanal, Danish, timber, art
Produkzio Teknologia: This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
Diseinu Erronka: The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent
Ikerketa: The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves
Inspirazioa: The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
Proiektuaren Iraupena: The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
Eragiketa Fluxua: The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms.
Patenteak: UK IPO design registration: 6053688
Taldekideak: John G Williams
Irudi Kredituak: All images: John G Williams