Jinyang Koo diseinatzailearen Dond Mahai Baxua

Jinyang Koo diseinatzailearen Dond Mahai Baxua lana 2020 Brontzezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Altzari Diseinua Lehiaketa Kategorian.

BrontzeAltzariak· 2020

Dond Mahai Baxua

diseinatzailea: Jinyang Koo

Bezeroa: Wuui

Brontzezko Saria A' Design Award Irabazlea Altzariak Kategorian

17,948

Egiaztatutako Sari Irabazlea

#88288 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

Dond Mahai Baxua Diseinuari Buruz

Dond-en diseinu narratiboa sinpletasuna da, hala ere, polifazetikoa. Bateratzeko pieza sinpleek 3D inprimagailu bat sortzen dute eta gutxieneko piezak diseinatzen dituzte kontsumitzaileak mahaia erraz muntatu edo garraiatzeko garaian. Diseinatzailearen helburua Dond-ek kontsumitzaileen eguneroko beharretan parte hartzea izan ohi zuen, barneko edo kanpoko edozein unetan bizimodu errazagoa izateko. Dond-ek diseinu zuzeneko ikuspegi bat erabiltzen du, hala nola goiko gainazala ez da hanketan itsatsi eta erraz kentzen da erretilu gisa erabiltzeko.

Aintzatespena

Brontzezko Saria A' Design Award Sariari Buruz

Dond Mahai Baxua Brontzezko Saria A' Design Award irabazlea da, sormenak, asmamenak eta zorroztasunak bereizten dituzten diseinu bikainei ematen zaien aitorpen oso prestijiotsua. Brontze-mailako irabazleak trebetasunez beteriko eta nabarmenki sortzaileak diren artefaktuak dira, beren diseinatzaileen esperientzia zabala, irudimena eta ekimena egiaztatzen dutenak. Dond Mahai Baxua oso estimatua, miretsia eta maitea den objektua izatea espero da, nabarmenki profesionala eta berritzailea dena. Brontzezko Saria A' Design Award irabazi duen diseinu honek artearen, zientziaren, diseinuaren eta teknologiaren praktika onenak biltzen ditu eta xehetasunei ematen dien arretagatik bikaina da. Dond Mahai Baxua beharrak bikain asetzen dituen, desirak ukitzen dituen, sentimenduak xarmatzen dituen eta jakin-mina erakartzen duen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Neurriak eta Ontziratzea: Top: 330mmx330mmx15mm
Overall Height: 415mm
Etiketak: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
Produkzio Teknologia: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Diseinu Erronka: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Ikerketa: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Inspirazioa: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Proiektuaren Iraupena: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Eragiketa Fluxua: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Taldekideak: JINYANG KOO