Aspen سر سه‌پایه by Colorado Tripod Company is a highly esteemed winner of the very prestigious 2021 جایزه نقره‌ای A' Design Award in طراحی دوربین و تجهیزات عکاسی Competition Category.
نقرهتجهیزات عکاسی· 2021
Aspen سر سه‌پایه
Client: Colorado Tripod Company
جایزه نقره‌ای A' Design Award Winner in تجهیزات عکاسی Category
Verified Award Winner
Verify Award Status for #108315The Design
About Aspen سر سه‌پایه
اسپن یک سر سه‌پایه است که برای ساده‌سازی ترکیب‌بندی عکاسی طراحی شده است. یک قاب باز به دوربین متصل‌شده اجازه می‌دهد در هر دو جهت به مقدار قابل توجهی فراتر از ۹۰ درجه بچرخد و بدون براکت‌های حجیم Lشکل، تغییر سریع بین حالت افقی و عمودی را فراهم می‌کند. توپ دارای یک هسته توخالی با سوراخ‌هایی است که وزن را کاهش می‌دهد و در عین حال استحکام را حفظ می‌کند. یک گیره اهرمی قابل تنظیم، طیف گسترده‌ای از صفحات دوربین را نگه می‌دارد، یک کنترل اصطکاک میزان مقاومت را تنظیم می‌کند و یک قفل چرخش، چرخش کامل را برای عکس‌های پانوراما امکان‌پذیر می‌سازد. اسپن از آلومینیوم آنودایز‌شده سخت ماشین‌کاری شده است.
The Recognition
About the جایزه نقره‌ای A' Design Award
Aspen سر سه‌پایه برنده جایزه نقره‌ای A' Design Award است، شناختی فوق‌العاده معتبر که به طراحی‌های سطح بالای زیبا، والا و تأثیرگذار اعطا می‌شود. برندگان نقره آثاری بسیار درخشان و فوق‌العاده خلاق‌اند که تخصص، استعداد و تیزبینی برجسته طراحان خود را نشان می‌دهند. از Aspen سر سه‌پایه انتظار می‌رود اثری شگفت‌انگیز و نمونه باشد که به‌طور چشمگیری حرفه‌ای و عمیقاً نوآورانه است. این طراحی برنده جایزه نقره‌ای A' Design Award اختراعی بسیار قابل‌توجه و ستوده است که سود می‌رساند و مرزهای هنر، علم، طراحی و فناوری را پیش می‌برد. Aspen سر سه‌پایه آفرینشی است که به آن بسیار رشک برده می‌شود، خواسته‌ها را بیدار می‌کند، احساسات مثبت می‌آورد و حیرت و شگفتی برمی‌انگیزد.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
- Dimensions & Packaging
- Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg - Tags
- tripod head, ball head, camera support, tripod, photography accessory
- Production Technology
- The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
- Design Challenge
- In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
- Research
- A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
- Inspiration
- The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
- Project Duration
- The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
- Operation Flow
- A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
- Patents
- Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
- Team Members
- Colorado Tripod Company
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
