Yatsugatake Villa ویلا by Kiyotoshi Mori and Natsuko Kawamura is a highly esteemed winner of the very prestigious 2022 جایزه برنزی A' Design Award in طراحی معماری، ساختمان و سازه Competition Category.
برنزمعماری· 2022
Yatsugatake Villa ویلا
by Kiyotoshi Mori and Natsuko Kawamura
Client: MDS Co., Ltd.
جایزه برنزی A' Design Award Winner in معماری Category
Verified Award Winner
Verify Award Status for #129187The Design
About Yatsugatake Villa ویلا
ویلای یاتسوگاتاکه یک اقامتگاه تعطیلات تابستانی است که در شهر هوکوتو، استان یاماناشی، ژاپن واقع شده است. این بنا از سه لوله ذوزنقه‌ای شکل تشکیل شده که به صورت بادبزنی چیده شده‌اند و به سمت جنوب باز می‌شوند. گشودگی وسیع جنوبی در طول زمستان سرد نور خورشید را به داخل هدایت می‌کند، در حالی که سقف کشیده‌شده و دیوارهای جانبی تابش شدید آفتاب تابستان را مسدود می‌کنند. پنجره‌های واقع در اضلاع شمالی و جنوبی اجازه می‌دهند که نسیم از میان فضای داخلی عبور کند. در ساخت این بنا از شیوه سنتی چوبی معماری ژاپنی، با استفاده از چوب سرو، گچ و پرده‌های شوجی بهره گرفته شده است. پرده‌های شوجی بسته، نوری نرم و ملایم ایجاد می‌کنند و پرده‌های باز، منظره کوهستانی اطراف را در قابی زیبا به نمایش می‌گذارند.
The Recognition
About the جایزه برنزی A' Design Award
Yatsugatake Villa ویلا برنده جایزه برنزی A' Design Award است، شناختی بسیار معتبر که به طراحی‌های برجسته‌ای اعطا می‌شود که با خلاقیت، نبوغ و زیرکی متمایز می‌شوند. برندگان برنز مصنوعاتی بسیار ماهرانه و چشمگیر خلاق‌اند که تجربه گسترده، تخیل و ابتکار طراحان خود را تأیید می‌کنند. از Yatsugatake Villa ویلا انتظار می‌رود شیئی بسیار ارجمند، ستوده و دوست‌داشتنی باشد که به‌طور چشمگیری حرفه‌ای و نوآورانه است. این طراحی برنده جایزه برنزی A' Design Award بهترین رویه‌ها را در هنر، علم، طراحی و فناوری در خود جمع می‌کند و به سبب توجه به جزئیات برجسته است. Yatsugatake Villa ویلا نیازها را زیبا برآورده می‌کند، به خواسته‌ها دست می‌زند، احساسات را مجذوب می‌سازد و کنجکاوی را برمی‌انگیزد.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The exterior is characterized by three modern trapezoid tubes, deforming the traditional Japanese space under deep eaves to frame the landscape in four directions. The form was derived from meticulous calculation of precipitation, the sun's movement in summer and winter, and the thermal environment. Shoji paper screens offer a space filled with soft light iconic of Japanese culture when closed, and switch to the majestic scenery framed by the walls when opened, providing two alternating scenes.
- Dimensions & Packaging
- Site Area 691.00m2
Total Floor Area 110.01 m2 (1F 71.65 m2, 2F 38.36 m2)
W17,400mm x D12,300mm x H6,139mm - Tags
- Villa, Sun light, Wind, Fan-shape, Wooden, Mountain, Three adjacent shells, Sho-ji, Eaves, Farming
- Production Technology
- Contrary to the contemporary style guided by precipitation, sun rays and the surrounding environment, the construction of the house incorporates traditional Japanese wooden construction methods, with earthquake-resistant walls and large openings. Traditional Japanese techniques and components are used throughout, including plastering on the curved openings and fittings such as shoji and ranma (partition with ventilation and daylighting functions), creating a vernacular architecture.
- Design Challenge
- In Japan, especially in rural areas, the number of carpenters capable of building elaborate wooden houses is decreasing, and it was difficult to find a builder who could construct a building with a unique (challenging) design. In spite of the modern design, Japanese cedar and plastering materials are used, and shoji screens as well as other traditional materials handed down from generation to generation are fit in by the indigenous module method, enabling the definition of a Japanese space.
- Research
- Three trapezoid tubes with north-south openings sit wide open towards the south to maximize winter daylight. Glass surfaces are set back from the roof edge to avoid direct south sun rays in summer. Side walls are arranged to block the west sun. The footprint is set back from the roof edge, partly to reduce soil excavation (deep foundation below the frost line is required), creating a sitting area free from rain dripping from the roof. It is a modern version of traditional Japanese engawa space.
- Inspiration
- With exterior walls arranged to resemble a fan, the house provides framing for the landscape, maximizing the location on a plateau surrounded by fields and trees with panoramic view of mountain ranges in the distance. It is a summer resort, slightly cooler than humid summers in Tokyo, and yet the sun rays are strong and the winters are cold. The roof was extended to block direct sunlight in the summer and side walls to keep the western sun out, resulting in a series of tubular forms.
- Project Duration
- The project was completed in Hokuto-City, Yamanashi, Japan in 2012
- Operation Flow
- Considering the cold winter, the building is built in a fan shape, open to the south, in order to maximize the sunlight while the sun moves. On the other hand, in summer, the roofs and walls of the trapezoid tubes block the strong sun rays, creating shadows inside, and windows at the north and south let the breeze through to cool the airy space. The layout, guided by the thermal environment, provides various interior scenes of varying depths as seen through the openings that connect the spaces.
- Team Members
- Kiyotoshi Mori
Natsuko Kawamura - Image Credits
- Photography: Toshiyuki Yano
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
