Decker صندلی تاشو by Cameron Smith is a highly esteemed winner of the very prestigious 2022 جایزه آهنی A' Design Award in طراحی مبلمان Competition Category.
آهنمبلمان· 2022
Decker صندلی تاشو
Client: Furniture Smith
جایزه آهنی A' Design Award Winner in مبلمان Category
Verified Award Winner
Verify Award Status for #137461The Design
About Decker صندلی تاشو
دکر یک صندلی تاشو است که برای استفاده در قایق‌های تفریحی طراحی شده است. این صندلی به شکل یک صندلی راحتی کوتاه باز می‌شود و به شکلی فشرده با ضخامتی تنها ۱۰۰ میلی‌متر تا می‌خورد. قاب آن از فولاد ضدزنگ با لوله‌های ذوزنقه‌ای و گوشواره‌های ریخته‌گری‌شده ساخته شده که در نقاط محور چرخش با یراق‌آلات برنجی به هم متصل می‌شوند. تسمه‌های چوب ساج به‌جای اتصال مستقیم به قاب، به بندهای تسمه‌ای وصل شده‌اند تا نشیمنگاه و پشتی بتوانند متناسب با حرکات کاربر انعطاف پیدا کنند. یک هندسه فراتر از مرکز، بندها را هنگام باز بودن صندلی در حالت کشش نگه می‌دارد. یک برجستگی در قاب نشیمنگاه به‌عنوان دستگیره‌ای برای حمل عمل می‌کند و آهنرباها پاهای تاشده را در جای خود ثابت نگه می‌دارند.
The Recognition
About the جایزه آهنی A' Design Award
Decker صندلی تاشو برنده جایزه آهنی A' Design Award است، شناختی معتبر که به طراحی‌های خوبی اعطا می‌شود که الزامات حرفه‌ای و صنعتی مورد انتظار از آفرینش‌های خوب طراحی‌شده را برآورده می‌کنند. برندگان آهن مهارت بزرگ، تخصص بالا، درک کارشناسانه و ظرفیت خلاقانه سازندگان خود را نشان می‌دهند. از Decker صندلی تاشو انتظار می‌رود آفرینشی بسیار ارجمند، ستوده و دوست‌داشتنی باشد که کاربردی و نوآورانه است. این طراحی برنده جایزه آهنی A' Design Award بهترین رویه‌های صنعت را یکپارچه می‌کند و ویژگی‌های فنی شایسته‌ای دارد که با دانش عملی و استعداد پیوند خورده است. Decker صندلی تاشو به سبب دقتش محترم است و برای عرضه بهبودهای کیفیت زندگی که به بهتر شدن جهان کمک می‌کنند طراحی شده است.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Inspired by the need for quality compact furniture on yachts, the Decker folding yacht chair easily folds from a lounge chair to a compact form factor. Teak wood slats are secured to webbing straps rather than the stainless steel frame to provide flex and added comfort in the seat. A jog in the seat frame creates a handle when folded and allows the needed geometry for an over center design that keeps the webbing in tension and the backrest open while in use.
The teak seat and back slats are secured to webbing straps that run from the front of the seat to the top of the back. When unfolded, the unique over-center design provides tension on the straps holding the teak seat and back. The straps provide a secure seat that flexes and gives with the user. - Dimensions & Packaging
- Open
660 mm wide x 730 mm deep x 673 mm tall
26” wide x 28.75” deep x 26.5” tall
Folded
660 mm wide x 570 mm deep x 100 mm thick
26” wide x 22.5” deep x 4” tall - Tags
- folding chair, yacht chair
- Production Technology
- Materials common in yachts such as stainless steel, brass and teak are used in the Decker chair. The stainless steel frame is fabricated with trapezoidal tubing and cast lugs. The tubing and lugs are welded and finished to create a seamless frame. Brass hardware is used for pivot joints and fastening hardware. An optional pad with outdoor fabric withstands the elements encountered by yachts.
- Design Challenge
- The chair has a simple design, yet there were several challenges in the design. Creating tension in the webbing and teak slats through the over center design of the backrest required multiple prototypes and webbing materials to be tested. The simplicity of the pivots required design iterations to create surfaces that interact with each other while the chair was open and closed. These simple details become the highlight of the chair.
- Research
- A lower lounge chair was selected to aid the ability to fold and nest shorter legs. An ergonomic model was created that allowed for adjustment of the angle and height of the seat and back.. Adjusting the angles and length of the components allowed for the geometry to be tested by various users for maximum comfort.
- Inspiration
- There is not a lot of room on yachts, but they maintain a high desire to have flexible furniture that can be easily stowed when not in use. Plastic chairs or bulky furniture aren't at home on expensive yachts. The Decker folding yacht chair can be used on deck and easily stowed when needed.
- Project Duration
- Design completed January 2022 with prototype units completed March 2022 in Seattle, Washington USA.
- Operation Flow
- The folding chair is simple to use. To close the chair simply flip the backrest down onto the seat. The teak slats relax when folded as the webbing is no longer under tension. With the backrest folded, the chair can be picked up by the handle on the back of the seat frame. The front legs are then folded followed by the back legs. The legs are held in place by magnets embedded inside the tubing.
The same process is used to unfold the chair. First the legs are unfolded and the chair placed on the legs. The backrest is opened and the teak slats are tightened with the webbing is tightened. - Team Members
- Cameron Smith
Adam Smith - Image Credits
- photo - Cameron Smith
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
