Bend میز قهوه by Jan Goderis is a highly esteemed winner of the very prestigious 2023 جایزه برنزی A' Design Award in طراحی مبلمان Competition Category.
برنزمبلمان· 2023
Bend میز قهوه
by Jan Goderis
جایزه برنزی A' Design Award Winner in مبلمان Category
Verified Award Winner
Verify Award Status for #148865The Design
About Bend میز قهوه
این میز از دو صفحه آلومینیومی خم شده ساخته شده است که در کنار هم قرار می گیرند. وقتی در کنار هم قرار می گیرند، صفحات تا پاها گسترش می یابند. این امر شفافیت و سبکی خاصی به طراحی می دهد و ذخیره سازی عمودی برای مجلات، روزنامه ها و چهارخانه ایجاد می شود. در بین دو صفحه رویی نیز امکان نگهداری در دو طرف میز وجود دارد.
The Recognition
About the جایزه برنزی A' Design Award
Bend میز قهوه برنده جایزه برنزی A' Design Award است، شناختی بسیار معتبر که به طراحی‌های برجسته‌ای اعطا می‌شود که با خلاقیت، نبوغ و زیرکی متمایز می‌شوند. برندگان برنز مصنوعاتی بسیار ماهرانه و چشمگیر خلاق‌اند که تجربه گسترده، تخیل و ابتکار طراحان خود را تأیید می‌کنند. از Bend میز قهوه انتظار می‌رود شیئی بسیار ارجمند، ستوده و دوست‌داشتنی باشد که به‌طور چشمگیری حرفه‌ای و نوآورانه است. این طراحی برنده جایزه برنزی A' Design Award بهترین رویه‌ها را در هنر، علم، طراحی و فناوری در خود جمع می‌کند و به سبب توجه به جزئیات برجسته است. Bend میز قهوه نیازها را زیبا برآورده می‌کند، به خواسته‌ها دست می‌زند، احساسات را مجذوب می‌سازد و کنجکاوی را برمی‌انگیزد.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Dimensions & Packaging
- Dimensions: 125 x 55 x 28 cm
- Tags
- coffee table, folded table, ecological design, functional design, minimal design
- Production Technology
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Design Challenge
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Research
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Inspiration
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Project Duration
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Operation Flow
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patents
- e-depot: 000595853
- Team Members
- Jan Goderis
- Image Credits
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
