Vista EY2T دوربین شناسایی بیومتریک موتوری by Chris Dopp & Travis Baldwin is a highly esteemed winner of the very prestigious 2015 جایزه نقره‌ای A' Design Award in طراحی محصولات امنیتی، ایمنی و نظارتی Competition Category.
نقرهمحصولات امنیتی· 2015
Vista EY2T دوربین شناسایی بیومتریک موتوری
by Chris Dopp & Travis Baldwin
Client: Vista Imaging and Crea Inc Design LTD
جایزه نقره‌ای A' Design Award Winner in محصولات امنیتی Category
Verified Award Winner
Verify Award Status for #40052The Design
About Vista EY2T دوربین شناسایی بیومتریک موتوری
Vista EY2T یک دوربین شناسایی بیومتریک موتوری برای تشخیص عنبیه و چهره است. این دستگاه میدان دید را برای یافتن چهره‌ها اسکن می‌کند، سپس موتورها دوربین را می‌چرخانند تا به سمت چشم‌ها نشانه‌گیری کنند. طیف گسترده‌ای از LEDهای مادون قرمز به همراه سیستم فوکوس خودکار امکان ثبت تصویر را در فاصله‌ای بین ۹۰ تا ۱۸۰ سانتی‌متر فراهم می‌کند، بنابراین نیازی به نشانه‌گیری دستی نیست. نه حسگر جلویی در پشت یک صفحه مشکی یکپارچه قرار گرفته‌اند و شکل استوانه‌ای و کپسول‌مانند با انتهای گرد، ظاهری آرام و غیرتهدیدآمیز به آن می‌بخشد. این دوربین را می‌توان به‌صورت مستقل یا همراه با پایه دیواری استفاده کرد.
The Recognition
About the جایزه نقره‌ای A' Design Award
Vista EY2T دوربین شناسایی بیومتریک موتوری برنده جایزه نقره‌ای A' Design Award است، شناختی فوق‌العاده معتبر که به طراحی‌های سطح بالای زیبا، والا و تأثیرگذار اعطا می‌شود. برندگان نقره آثاری بسیار درخشان و فوق‌العاده خلاق‌اند که تخصص، استعداد و تیزبینی برجسته طراحان خود را نشان می‌دهند. از Vista EY2T دوربین شناسایی بیومتریک موتوری انتظار می‌رود اثری شگفت‌انگیز و نمونه باشد که به‌طور چشمگیری حرفه‌ای و عمیقاً نوآورانه است. این طراحی برنده جایزه نقره‌ای A' Design Award اختراعی بسیار قابل‌توجه و ستوده است که سود می‌رساند و مرزهای هنر، علم، طراحی و فناوری را پیش می‌برد. Vista EY2T دوربین شناسایی بیومتریک موتوری آفرینشی است که به آن بسیار رشک برده می‌شود، خواسته‌ها را بیدار می‌کند، احساسات مثبت می‌آورد و حیرت و شگفتی برمی‌انگیزد.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
- Dimensions & Packaging
- The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm. - Tags
- Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
- Production Technology
- The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
- Design Challenge
- The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
- Research
- Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
- Inspiration
- Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
- Project Duration
- The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
- Operation Flow
- When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture. - Team Members
- Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin - Image Credits
- Image #1: Photographer Travis Baldwin / In Office / 2015
Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015
Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015
Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015
Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
