Airwood Dronesetsje troch Uavi Technology

Airwood Dronesetsje troch Uavi Technology is in heech wurdearre winner fan de tige prestizjeuze 2020 A' Design Award yn Izer yn de kompetysje-kategory Boartersguod, Spultsjes en Hobbyprodukten Ûntwerp.

IzerBoartersguod· 2020

Airwood Dronesetsje

troch Uavi Technology

Klant: UAVI Technology (Shen Zhen) Limited

A' Design Award yn Izer Winner yn de kategory Boartersguod

17,405

Ferifiearre Priiswinner

Ferifiearje Prisstatus foar #103852

Besykje Side Besjoch by A' Design Award Parseberjocht Priisbadge

Kleuren

It Untwerp

Oer Airwood Dronesetsje

Airwood is in gearstalsetsje foar in drone, ûntwurpen foar bern en folwoeksenen. De dronê mei fjouwer assen makket gebrûk fan in ramt fan gearstald lindehout, dat mei in lasersnijer yn tinne stikjes fan twa millimeter snien wurdt. Brûkers stelle de houten platen en de elektroanyske ûnderdielen mei de hân gear, om sawol de drone as de ôfstânsbetsjinning te bouwen. Modulêre controllers, motoren en batterijen meitsje it mooglik om ferskate ramten en uterlikformen te meitsjen mei ien setsje. De drone stipet it hingjen binnendoar, loftfotografy en grafyske programmearring. It sertifisearre hout ferminderet it gebrûk fan plastic en metaal.

De Erkenning

Oer de A' Design Award yn Izer

Airwood Dronesetsje is in winner fan de A' Design Award yn Izer, in prestisjeuze erkenning foar goede ûntwerpen dy't foldogge oan de profesjonele en yndustriële easken dy't ferwachte wurde fan goed ûntwurpen skeppings. Izerwinners litte grutte feardigens, hege spesjalisaasje, deskundich begryp en kreatyf fermogen fan har makkers sjen. Fan Airwood Dronesetsje wurdt ferwachte dat it in tige heech achte, bewûndere en dierbere skepping is dy't praktysk en ynnovatyf is. Dit winnende ûntwerp fan de A' Design Award yn Izer yntegrearret de bêste praktiken fan de sektor en hat feardige technyske skaaimerken ferbûn mei kennis en talint. Airwood Dronesetsje wurdt respektearre foar syn yngeandens en is ûntwurpen om ferbetteringen fan de kwaliteit fan it libben te leverjen dy't helpe de wrâld ta in bettere plak te meitsjen.

Efter it Untwerp

Parsepakket

Credits, teamleden en technyske details levere troch de ûntwerper.

Unike Eigenskippen: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Ofmjittingen & Ferpakking: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Labels: Drone, Wood, DIY, Modularity, Programmable
Produksjetechnology: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Untwerpútdaging: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Undersyk: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Ynspiraasje: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Projektdoer: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Operaasjestreamferrin: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patinten: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Ofbyldingskrediten: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.