Wedge House Wenhûs troch Kiyoshi Sugimoto

Wedge House Wenhûs troch Kiyoshi Sugimoto is in heech wurdearre winner fan de tige prestizjeuze 2025 A' Design Award yn Brûns yn de kompetysje-kategory Arsjitektuer, Gebou en Struktuerûntwerp.

BrûnsArsjitektuer· 2025

Wedge House Wenhûs

troch Kiyoshi Sugimoto

Klant: Masato Ikuta

A' Design Award yn Brûns Winner yn de kategory Arsjitektuer

12,587

Ferifiearre Priiswinner

Ferifiearje Prisstatus foar #162815

Besykje Side Besjoch by A' Design Award Parseberjocht Priisbadge

Kleuren

It Untwerp

Oer Wedge House Wenhûs

Wedge House is in trije ferdjipping heech wenhûs boud op in smel plak mei in steile helling yn Ikeda City, Japan. De wigfoarmige trochsneed pleatst de grutste ferdjipping oan de boppekant en de lytste ferdjipping ûndergrûns, sadat der gjin ekstra krêft útoefene wurdt op in âlde kearmuorre. De twa boppeste ferdjippingen binne fan hout makke en de kelder is fan gewapend beton. De east- en westmuorren binne ôfwurke mei silverkleurige stiel platen dy't de útkragjende ferdjipping stypje en it útsjoch nei it suden ynkaderje. It wengebiet op de twadde ferdjipping iepenet him nei in terras mei in wiid útsjoch.

De Erkenning

Oer de A' Design Award yn Brûns

Wedge House Wenhûs is in winner fan de A' Design Award yn Brûns, in heech prestisjeuze erkenning foar treflike ûntwerpen dy't har ûnderskiede troch kreativiteit, fernuft en tûkens. Brûnswinners binne tige feardige en opfallend kreative artefakten dy't de grutte ûnderfining, ferbylding en betochtsumens fan har ûntwerpers befêstigje. Fan Wedge House Wenhûs wurdt ferwachte dat it in tige heech achte, bewûndere en dierber objekt is dat opmerklik profesjoneel en ynnovatyf is. Dit winnende ûntwerp fan de A' Design Award yn Brûns yntegrearret de bêste praktiken yn keunst, wittenskip, ûntwerp en technology en is treflik om syn omtinken foar detail. Wedge House Wenhûs foldocht behoeften prachtich, reitsjet winsken, betsjoeveret gefoelens en sprekt nijsgjirrigens oan.

Efter it Untwerp

Parsepakket

Credits, teamleden en technyske details levere troch de ûntwerper.

Unike Eigenskippen: The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
Ofmjittingen & Ferpakking: Total floor area 111.16㎡　Width 5560mm x Depth 11000mm x Height 10190mm
Labels: Slopingland structure protruding structure wedge Basement mountainside
Produksjetechnology: The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
Untwerpútdaging: Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
Undersyk: Research on stable structures with protruding shapes in wooden buildings
Ynspiraasje: The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
Projektdoer: Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
Operaasjestreamferrin: A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
Teamleden: KIYOSHI SUGIMOTO
Ofbyldingskrediten: All photos and videos Hirofumi Imanishi