Airwood Trealamh Dróin le Uavi Technology

Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2020 Duais Iarainn A' Design Award sa Chatagóir Comórtais Dearadh Bréagán é an dearadh Airwood Trealamh Dróin le Uavi Technology.

IarannBréagán· 2020

Airwood Trealamh Dróin

le Uavi Technology

Cliant: UAVI Technology (Shen Zhen) Limited

Buaiteoir an ghradaim Duais Iarainn A' Design Award sa Chatagóir Bréagán

17,405

Buaiteoir Gradaim Fíoraithe

Fíoraigh Stádas Gradaim do #103852

Tabhair Cuairt ar an Suíomh Féach ag A' Design Award Preasráiteas Suaitheantas Gradaim

Dathanna

An Dearadh

Maidir le Airwood Trealamh Dróin

Is trealamh cóimeála dróin é Airwood atá deartha do pháistí agus do dhaoine fásta. Úsáideann an dróin ceithre-aiseach fráma déanta as bord cumaisc bassbhinne, gearrtha ina phíosaí tanaí dhá mhilliméadar ag gearrthóir léasair. Cuireann úsáideoirí na cláir adhmaid agus na páirteanna leictreonacha le chéile de láimh chun an dróin agus an cianrialtán araon a thógáil. Ceadaíonn rialtóirí, mótair agus cadhnraí modúlacha go leor frámaí agus cuma éagsúla a chruthú ó thacar amháin. Tacaíonn an dróin le foluain laistigh, grianghrafadóireacht aeir agus ríomhchlárú grafach. Laghdaíonn an t-adhmad deimhnithe úsáid plaisteach agus miotail.

An Aitheantas

Maidir leis an Duais Iarainn A' Design Award

Bhuaigh an dearadh Airwood Trealamh Dróin Duais Iarainn A' Design Award, aitheantas gradamach a bhronntar ar dhea-dhearaí a chomhlíonann na riachtanais ghairmiúla agus thionsclaíocha a bhíonn á n-éileamh ó chruthuithe a ndearnadh go maith iad. Léiríonn buaiteoirí Iarainn scil mhór, speisialtóireacht ard, tuiscint saineolaí agus cumas cruthaitheach a gcruthaitheoirí. Táthar ag súil go mbeidh an dearadh Airwood Trealamh Dróin ina chruthú a bhfuil an-mheas air, a n-ardaítear agus a ghráitear atá praiticiúil agus nuálach. Comhtháthaíonn an dearadh seo a bhuaigh Duais Iarainn A' Design Award na cleachtais is fearr sa tionscal agus tá saintréithe teicniúla inniúla aige nasctha le heolas agus le tallann. Tá meas ar an dearadh Airwood Trealamh Dróin as a dhúthracht agus dearadh é chun feabhsuithe cáilíochta beatha a sholáthar a chabhraíonn leis an domhan a dhéanamh ina áit níos fearr.

Taobh Thiar den Dearadh

Pacáiste Preasa

Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.

Airíonna Uathúla: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Toisí & Pacáistiú: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Clibeanna: Drone, Wood, DIY, Modularity, Programmable
Teicneolaíocht Táirgthe: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Dúshlán Deartha: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Taighde: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspioráid: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Fad an Tionscadail: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Sreabhadh Oibríochta: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Paitinní: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Creidiúintí Íomhá: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.