Sprout Rothar le JunXiang Cheng and Yi Yang

Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2022 Duais Iarainn A' Design Award sa Chatagóir Comórtais Dearadh Priontála 3T é an dearadh Sprout Rothar le JunXiang Cheng and Yi Yang.

IarannPriontáil 3T· 2022

Sprout Rothar

le JunXiang Cheng and Yi Yang

Cliant: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Buaiteoir an ghradaim Duais Iarainn A' Design Award sa Chatagóir Priontáil 3T

31,470

Buaiteoir Gradaim Fíoraithe

Fíoraigh Stádas Gradaim do #137286

Féach ag A' Design Award Preasráiteas Suaitheantas Gradaim

Dathanna

An Dearadh

Maidir le Sprout Rothar

Is rothar é Sprout a tháirgtear trí phriontáil tríthoiseach. Cruthaítear cruth an fhráma trí bharrfeabhsú topaíochta, rud a chuireann ábhar san áireamh san áit is gá amháin agus a laghdaíonn an méid iomlán a úsáidtear. Deimhníonn anailís struis statach leis an modh eilimintí críochta cobhsaíocht struchtúr an fhráma. Priontáiltear an tsamhail dheiridh i níolón ard-dlúis. Tomhaiseann an rothar 1630 mm ar fhad, 600 mm ar leithead agus 832 mm ar airde. Cuireann an phriontáil deireadh leis an ngá atá le múnlaí costasacha, rud a chiallaíonn gur féidir le gach fráma dearadh aonair a leanúint.

An Aitheantas

Maidir leis an Duais Iarainn A' Design Award

Bhuaigh an dearadh Sprout Rothar Duais Iarainn A' Design Award, aitheantas gradamach a bhronntar ar dhea-dhearaí a chomhlíonann na riachtanais ghairmiúla agus thionsclaíocha a bhíonn á n-éileamh ó chruthuithe a ndearnadh go maith iad. Léiríonn buaiteoirí Iarainn scil mhór, speisialtóireacht ard, tuiscint saineolaí agus cumas cruthaitheach a gcruthaitheoirí. Táthar ag súil go mbeidh an dearadh Sprout Rothar ina chruthú a bhfuil an-mheas air, a n-ardaítear agus a ghráitear atá praiticiúil agus nuálach. Comhtháthaíonn an dearadh seo a bhuaigh Duais Iarainn A' Design Award na cleachtais is fearr sa tionscal agus tá saintréithe teicniúla inniúla aige nasctha le heolas agus le tallann. Tá meas ar an dearadh Sprout Rothar as a dhúthracht agus dearadh é chun feabhsuithe cáilíochta beatha a sholáthar a chabhraíonn leis an domhan a dhéanamh ina áit níos fearr.

Taobh Thiar den Dearadh

Pacáiste Preasa

Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.

Airíonna Uathúla: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Toisí & Pacáistiú: Length 1630mm, width600mm, height 832mm
Clibeanna: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Teicneolaíocht Táirgthe: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dúshlán Deartha: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Taighde: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspioráid: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Fad an Tionscadail: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Sreabhadh Oibríochta: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Baill Foirne: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao