DefeXtiles Innleachd Chruthachaidh Aodaich le Jack Forman

Tha DefeXtiles Innleachd Chruthachaidh Aodaich le Jack Forman na bhuannaiche air leth urramach anns an fharpais chliùitich 2021 Duais Airgid A' Design Award ann an Roinn Farpais Dealbhadh Teacsail, Aodaich, Binneis, Pàtranan agus Clò.

AirgeadTeacsail· 2021

DefeXtiles Innleachd Chruthachaidh Aodaich

le Jack Forman

Neach-ceannach: Tangible Media Group, Mit Media Lab

Buannaiche Duais Airgid A' Design Award ann an Roinn Teacsail

54,895

Buannaiche Duais Dearbhaichte

Dearbhaich Inbhe na Duaise airson #109724

Tadhail air an Làrach Seall aig A' Design Award Brath Naidheachd Suaicheantas Duaise

Dathan

An Dealbhadh

Mu dheidhinn DefeXtiles Innleachd Chruthachaidh Aodaich

'S e innleachd chruthachaidh aodaich a th' ann an DefeXtiles a bheir a-mach aodaichean tana sùbailte air clò-bhualadairean 3D àbhaisteach. Bidh an dòigh a' smachdachadh fo-bhrùthadh gus am bi cnapan beaga a' cruthachadh le sreangan fìnealta eatorra. Bheir na beàrnan cunbhalach a thig às an seo coltas fighte, so-analachaidh, sùbailteachd agus sìneadh, eadhon le stuthan cruaidhe leithid searbhag polylactic. Tha an t-aodach ga chlò-bhualadh ceart-cheàrnach ris an leabaidh chlò-bhualaidh, agus mar sin gabhaidh cumaidhean pleatach, lùbte agus toinnte a dhèanamh. Am measg nan tagraidhean tha aodach, eadar-aghaidhean beanailteach agus dèideagan.

An Aithneachadh

Mu dheidhinn Duais Airgid A' Design Award

Tha DefeXtiles Innleachd Chruthachaidh Aodaich air Duais Airgid A' Design Award a bhuannachadh, aithneachadh gu math urramach a bheirear do dhealbhaidhean den chiad ìre, àlainn agus drùidhteach. Tha buannaichean Airgid nan obraichean anabarrach boillsgeach agus gu math cruthachail a nochdas sàr-eòlas, tàlant agus geurchuis an luchd-dealbhaidh. Thathar an dùil gum bi DefeXtiles Innleachd Chruthachaidh Aodaich na obair mhìorbhaileach, na sàr-eisimpleir a tha gu sònraichte proifeiseanta agus gu domhainn ùr-ghnàthach. Tha an dealbhadh seo a bhuannaich Duais Airgid A' Design Award na innleachd glè fhaicsinneach, ion-mholta a bhrosnaicheas crìochan ealain, saidheans, dealbhaidh agus teicneolais. Tha DefeXtiles Innleachd Chruthachaidh Aodaich na chruthachadh air a bheil mòran eud, a dhùisgeas miannan, a bheir faireachdainnean math agus a thogas iongnadh is miorbhail.

Air Cùl an Dealbhaidh

Pasgan Naidheachd

Creideasan, buill sgioba agus fiosrachadh teicnigeach a chuir an dealbhaiche ri chèile.

Feartan Sònraichte: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tagaichean: textile, 3d print, lace, advanced manufacturing, fabric
Teicneòlas Cinneasachaidh: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Dùbhlan Dealbhaidh: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Rannsachadh: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Brosnachadh: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Faid a' Phròiseict: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Sruth Obrachaidh: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Buill na Sgioba: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii