Tha C3 Sterilization Sinc Cidsin le Nuomi na bhuannaiche air leth urramach anns an fharpais chliùitich 2025 Duais Airgid A' Design Award ann an Roinn Farpais Dealbhadh Àirneis, Uidheamachd agus Ficstiùirean Cidsin.

AirgeadÀirneis Cidsin· 2025

C3 Sterilization Sinc Cidsin

le Nuomi

Neach-ceannach: Guangdong Nuomi Home Intelligent Technology Co.,Ltd

Buannaiche Duais Airgid A' Design Award ann an Roinn Àirneis Cidsin

48,693

Buannaiche Duais Dearbhaichte

Dearbhaich Inbhe na Duaise airson #172108

Seall aig A' Design Award Brath Naidheachd Suaicheantas Duaise

Dathan

An Dealbhadh

Mu dheidhinn C3 Sterilization Sinc Cidsin

'S e sinc cidsin a th' ann an C3 Sterilization le cùram bùird-ghearraidh air fhilleadh a-steach. Bidh seòmar tòghte a' cleachdadh solas ultra-bhìolait agus cuairteachadh èadhair theth gus bòrd-gearraidh a sterileachadh agus a thiormachadh ann an 15 mionaidean. Tòisichidh am pròiseas cùraim gu fèin-obrachail nuair a thèid am bòrd-gearraidh a chur na bhroinn, agus tha stiall solais mothachair a' sealltainn inbhe na h-obrach. Tha còmhdach nano hydrophobic air na ballachan a-staigh airson seasamh an aghaidh sgròbaidh agus fèin-ghlanadh, agus tha filleadh ian airgid an aghaidh bhacteria air a' phìob-drèanaidh. Tha dealbhadh stòraidh dhìreach le raca-sgeinean magnaiteach a' sàbhaladh rùm ann an cidsinean beaga.

An Aithneachadh

Mu dheidhinn Duais Airgid A' Design Award

Tha C3 Sterilization Sinc Cidsin air Duais Airgid A' Design Award a bhuannachadh, aithneachadh gu math urramach a bheirear do dhealbhaidhean den chiad ìre, àlainn agus drùidhteach. Tha buannaichean Airgid nan obraichean anabarrach boillsgeach agus gu math cruthachail a nochdas sàr-eòlas, tàlant agus geurchuis an luchd-dealbhaidh. Thathar an dùil gum bi C3 Sterilization Sinc Cidsin na obair mhìorbhaileach, na sàr-eisimpleir a tha gu sònraichte proifeiseanta agus gu domhainn ùr-ghnàthach. Tha an dealbhadh seo a bhuannaich Duais Airgid A' Design Award na innleachd glè fhaicsinneach, ion-mholta a bhrosnaicheas crìochan ealain, saidheans, dealbhaidh agus teicneolais. Tha C3 Sterilization Sinc Cidsin na chruthachadh air a bheil mòran eud, a dhùisgeas miannan, a bheir faireachdainnean math agus a thogas iongnadh is miorbhail.

Air Cùl an Dealbhaidh

Pasgan Naidheachd

Creideasan, buill sgioba agus fiosrachadh teicnigeach a chuir an dealbhaiche ri chèile.

Feartan Sònraichte: The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
Tomhasan & Pacadh: 780*482*220mm
Tagaichean: integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
Teicneòlas Cinneasachaidh: The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
Dùbhlan Dealbhaidh: The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
Rannsachadh: In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
Brosnachadh: It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
Faid a' Phròiseict: The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
Sruth Obrachaidh: UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.