DefeXtiles Técnica de Fabricación Téxtil de Jack Forman

O deseño DefeXtiles Técnica de Fabricación Téxtil de Jack Forman é un estimado gañador do moi prestixioso 2021 A' Design Award de Prata na Categoría de Competición Deseño Téxtil, Tecidos, Texturas, Patróns e Teas.

PrataTéxtil· 2021

DefeXtiles Técnica de Fabricación Téxtil

de Jack Forman

Cliente: Tangible Media Group, Mit Media Lab

Gañador do A' Design Award de Prata na Categoría Téxtil

54,895

Gañador de Premio Verificado

Verificar o Estado do Premio para #109724

Visitar sitio Ver en A' Design Award Nota de prensa Distintivo do premio

Cores

O Deseño

Sobre DefeXtiles Técnica de Fabricación Téxtil

DefeXtiles é unha técnica de fabricación téxtil que produce tecidos finos e flexibles en impresoras 3D estándar. O método controla a subextrusión de xeito que se forman pequenas gotas con fíos finos entre elas. Os ocos periódicos resultantes proporcionan unha aparencia tecida, transpirabilidade, flexibilidade e elasticidade, mesmo con materiais ríxidos como o ácido poliláctico. O tecido imprímese perpendicularmente á base de impresión, polo que se poden crear formas pregadas, curvas e complexas. As aplicacións inclúen pezas de roupa, interfaces tanxibles e xoguetes.

O Recoñecemento

Sobre o A' Design Award de Prata

DefeXtiles Técnica de Fabricación Téxtil gañou o A' Design Award de Prata, un recoñecemento enormemente prestixioso outorgado a deseños de gama alta, fermosos e impresionantes. Os gañadores Prata son obras tremendamente brillantes e sumamente creativas que ilustran a pericia, o talento e a agudeza sobresaíntes dos seus deseñadores. Espérase que DefeXtiles Técnica de Fabricación Téxtil sexa unha obra marabillosa, escaparate de oficio, notablemente profesional e profundamente innovadora. Este deseño gañador do A' Design Award de Prata é unha invención moi notable e admirada que beneficia e fai avanzar os límites da arte, a ciencia, o deseño e a tecnoloxía. DefeXtiles Técnica de Fabricación Téxtil é unha creación moi envexada que esperta desexos, achega sentimentos positivos e prende asombro e marabilla.

Detrás do deseño

Kit de prensa

Créditos, membros do equipo e detalles técnicos proporcionados polo deseñador.

Propiedades Únicas: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Etiquetas: textile, 3d print, lace, advanced manufacturing, fabric
Tecnoloxía de Produción: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Reto de Deseño: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Investigación: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspiración: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Duración do Proxecto: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Fluxo de Operacións: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Membros do Equipo: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii