Sprout Bicicleta de JunXiang Cheng and Yi Yang

O deseño Sprout Bicicleta de JunXiang Cheng and Yi Yang é un estimado gañador do moi prestixioso 2022 A' Design Award de Ferro na Categoría de Competición Deseño de Formas e Produtos Impresos en 3D.

FerroImpresión 3D· 2022

Sprout Bicicleta

de JunXiang Cheng and Yi Yang

Cliente: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Gañador do A' Design Award de Ferro na Categoría Impresión 3D

31,470

Gañador de Premio Verificado

Verificar o Estado do Premio para #137286

Ver en A' Design Award Nota de prensa Distintivo do premio

Cores

O Deseño

Sobre Sprout Bicicleta

Sprout é unha bicicleta producida mediante impresión tridimensional. O cadro está conformado a través da optimización topolóxica, que coloca material só onde é necesario e reduce a cantidade total empregada. A análise estática de tensións co método dos elementos finitos verifica a estabilidade da estrutura do cadro. O modelo final imprímese en nailon de alta densidade. A bicicleta mide 1630 mm de lonxitude, 600 mm de anchura e 832 mm de altura. A impresión elimina a necesidade de moldes custosos, polo que cada cadro pode seguir un deseño individual.

O Recoñecemento

Sobre o A' Design Award de Ferro

Sprout Bicicleta gañou o A' Design Award de Ferro, un recoñecemento prestixioso outorgado a bos deseños que cumpren os requisitos profesionais e industriais esperados de creacións ben deseñadas. Os gañadores Ferro demostran a gran habilidade, a alta especialización, a comprensión experta e a capacidade creativa dos seus creadores. Espérase que Sprout Bicicleta sexa unha creación moi apreciada, admirada e querida que é práctica e innovadora. Este deseño gañador do A' Design Award de Ferro integra as mellores prácticas do sector e ten características técnicas competentes ligadas ao saber facer e ao talento. Sprout Bicicleta é respectado pola súa minuciosidade e está deseñado para proporcionar melloras na calidade de vida que axudan a facer do mundo un lugar mellor.

Detrás do deseño

Kit de prensa

Créditos, membros do equipo e detalles técnicos proporcionados polo deseñador.

Propiedades Únicas: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimensións e Embalaxe: Length 1630mm, width600mm, height 832mm
Etiquetas: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Tecnoloxía de Produción: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Reto de Deseño: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Investigación: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiración: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Duración do Proxecto: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Fluxo de Operacións: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Membros do Equipo: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao