Engo Función Principal: Carcasa para Baterías by Vladimir Zagorac

Engo Función Principal: Carcasa para Baterías by Vladimir Zagorac is a highly esteemed winner of the very prestigious 2023 A' Design Award de Ferro in Deseño de Produtos, Proxectos e Dispositivos Enerxéticos Competition Category.

FerroEnerxía· 2023

Engo Función Principal: Carcasa para Baterías

by Vladimir Zagorac

Client: EnGo Planet

A' Design Award de Ferro Winner in Enerxía Category

25,558

Verified Award Winner

Verify Award Status for #148633

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Engo Función Principal: Carcasa para Baterías

Texto do Libro: Engo é unha carcasa apilable para baterías deseñada para produtos solares e outros usos de almacenamento de enerxía. A carcasa está feita de aluminio cun armazón de aceiro, placas de plástico e illamento de goma. Os bordos verticais chanfrados e as esquinas encaixadas forman un percorrido oculto para a cablaxe, de xeito que os cables permanecen ordenados tanto na dirección horizontal coma na vertical. As paredes prolongadas na parte superior e inferior cobren os cables e permiten un apilamento seguro, deixando espazo para conectar os terminais. Tres capas de illamento manteñen a batería a unha temperatura de traballo estable.

The Recognition

About the A' Design Award de Ferro

Engo Función Principal: Carcasa para Baterías gañou o A' Design Award de Ferro, un recoñecemento prestixioso outorgado a bos deseños que cumpren os requisitos profesionais e industriais esperados de creacións ben deseñadas. Os gañadores Ferro demostran a gran habilidade, a alta especialización, a comprensión experta e a capacidade creativa dos seus creadores. Espérase que Engo Función Principal: Carcasa para Baterías sexa unha creación moi apreciada, admirada e querida que é práctica e innovadora. Este deseño gañador do A' Design Award de Ferro integra as mellores prácticas do sector e ten características técnicas competentes ligadas ao saber facer e ao talento. Engo Función Principal: Carcasa para Baterías é respectado pola súa minuciosidade e está deseñado para proporcionar melloras na calidade de vida que axudan a facer do mundo un lugar mellor.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The straightforward geometric form of the enclosure is interrupted only by chamfered vertical edges and recessed corners. These details are part of a hidden cabling solution, especially useful within large battery sets, enabling clean and minimally noticeable wiring in any direction, both horizontally and vertically. Extended walls on the top and bottom of the housing keep the cables covered and allow safe stacking while giving enough room to connect the terminals between the stacked pieces.
Dimensions & Packaging: 30Ah unit W: 205mm, D: 90mm, H: 215mm; 60Ah unit W: 220mm, D: 120mm, H: 380mm; 100Ah unit W: 248mm, D: 120mm, H: 556mm.
Tags: Smart Battery, Power Wall, Stackable, Minimal, Cable Management
Production Technology: Aluminum casing, steel frame, plastic plates, rubber insulation
Design Challenge: The battery is to be used in retrofit solar equipment, as an individual product, inside solutions such as power walls, electric vehicles, yachts, etc. That required smart usage of available space. Thermal and water insulation were given careful attention. Three layers of insulation, including ceramic coating, keep the battery pack at a constant temperature and operational between minus twenty and plus eighty degrees Celsius. The rubber used for insulation of the top and bottom of the enclosure gives enough flexibility to compensate for an uneven floor but does not allow capsizing.
Research: A simple production process in any given volume, different sizes of battery packs used, and low starting cost suggested aluminum for the housing. That also planted the idea to use as little manual operation as possible, calling for a minimal but characteristic design that could be produced by CNC cutting and bending. The proportions of the few visible details were refined according to the dimensions of cables, contacts, and connectors, which needed to fit perfectly in the space between the neighboring housings.
Inspiration: The project started with the idea to produce battery casings for a range of EnGo Planet's solar products. After analysis of a typical installation process and everyday usage scenarios, inspiration was found in pure functionality and minimal aesthetic expression. Easy stacking, optimal space usage, and intelligent cable management were the main focus of the design.
Project Duration: The project lasted several weeks and took place in USA and Europe.
Operation Flow: A combination of design details and flexible materials used on the top and bottom of the housing keep the wiring neat and give a clean look to any battery set. The bottom rubber surface features two openings that match the position of the terminals on the unit placed below. The side openings allow lifting the case using a strap, which makes the stacking of heavier versions of the battery easier. The operation and capacity of the unit can be monitored by a smartphone over Bluetooth. The product is available with an optional voltmeter, switch, and USB inlets for charging mobile devices.
Patents: Vladimir Zagorac
Team Members: Vladimir Zagorac
Image Credits: Vladimir Zagorac