O deseño Bend A Mesa De Centro de Jan Goderis é un estimado gañador do moi prestixioso 2023 A' Design Award de Bronce na Categoría de Competición Deseño de Mobiliario.

BronceMobiliario· 2023

Bend A Mesa De Centro

de Jan Goderis

Gañador do A' Design Award de Bronce na Categoría Mobiliario

15,355

Gañador de Premio Verificado

Verificar o Estado do Premio para #148865

Visitar sitio Ver en A' Design Award Nota de prensa Distintivo do premio

Cores

O Deseño

Sobre Bend A Mesa De Centro

A mesa está feita de dúas placas de aluminio dobradas que encaixan entre si. Cando se xuntan, as placas esténdense ata as pernas. Isto dá unha certa transparencia e lixeireza ao deseño e créase almacenamento vertical para revistas, xornais e cadros. Entre as dúas placas superiores, tamén existe a posibilidade de almacenar a ambos os dous lados da mesa.

O Recoñecemento

Sobre o A' Design Award de Bronce

Bend A Mesa De Centro gañou o A' Design Award de Bronce, un recoñecemento altamente prestixioso outorgado a deseños sobresaíntes que se distinguen pola creatividade, o enxeño e a sagacidade. Os gañadores Bronce son artefactos amplamente hábiles e sorprendentemente creativos que autentican a vasta experiencia, imaxinación e enxeño dos seus deseñadores. Espérase que Bend A Mesa De Centro sexa un obxecto moi apreciado, admirado e querido, notablemente profesional e innovador. Este deseño gañador do A' Design Award de Bronce incorpora as mellores prácticas da arte, a ciencia, o deseño e a tecnoloxía, e é excelente pola súa atención ao detalle. Bend A Mesa De Centro satisfai espléndidamente as necesidades, toca os desexos, encanta os sentimentos e atrae a curiosidade.

Detrás do deseño

Kit de prensa

Créditos, membros do equipo e detalles técnicos proporcionados polo deseñador.

Propiedades Únicas: The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
Dimensións e Embalaxe: Dimensions: 125 x 55 x 28 cm
Etiquetas: coffee table, folded table, ecological design, functional design, minimal design
Tecnoloxía de Produción: Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
Reto de Deseño: The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
Investigación: The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
Inspiración: The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
Duración do Proxecto: The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
Fluxo de Operacións: The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
Patentes: e-depot: 000595853
Membros do Equipo: Jan Goderis
Créditos das Imaxes: #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022