Sprout Kicicleta by JunXiang Cheng and Yi Yang is a highly esteemed winner of the very prestigious 2022 A' Design Award Fiero in 3D Kuatiaha Jejapo Competition Category.
Fiero3D Kuatiaha· 2022
Sprout Kicicleta
Client: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
A' Design Award Fiero Winner in 3D Kuatiaha Category
- 31,470
- Verified Award Winner
- Verify Award Status for #137286
The Design
About Sprout Kicicleta
Sprout ha'e peteĩ kicicleta ojejapóva mbohapy dimensión-pe ñemyi (three-dimensional printing) rupive. Pe frame ojeforma topología optimización rupive, oiporúva material añónte oñeikotevẽháicha, ha upéicha omombyky pe material total ojeporúva. Estático stress análisis, finito elemento metodo reheve, omohesakã pe frame estructura imbaretehague. Pe modelo paha ojeprinta nylon ipoguýva reheve. Pe kicicleta oguereko 1630 mm ipukukue, 600 mm ipeteĩkue ha 832 mm iyvatekue. Pe impresión ndoikotevẽi molde hepýva, upéicha káda frame ikatu ojejapo diseño individual reheve.
The Recognition
About the A' Design Award Fiero
Sprout Kicicleta ohupyty A' Design Award Fiero, peteĩ ñehechakuaa prestigioso oñeme'ẽva diseño iporã-pe ohupytýva requisito profesional ha industrial oñeha'ãrõva creación iporã oñemoĩva-gui. Umi ganador Fiero ohechauka habilidad guasu, especialización yvate, comprensión experta ha capacidad creativa umi creador rehegua. Oñeha'ãrõ Sprout Kicicleta ha'eha creación ojehayhúva, admirada ha estimada, práctica ha innovadora. Ko diseño ohupytýva A' Design Award Fiero ombojoaju mejor práctica industria rehegua ha oguereko característica técnica competente ojoajúva conocimiento ha talento ndive. Sprout Kicicleta oñerespeta hembiapo cuidadoso rupi ha oñemoĩ ome'ẽ hag̃ua mejora calidad de vida rehegua oipytyvõva yvy ape iporãve hag̃ua.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- Dimensions & Packaging
- Length 1630mm, width600mm, height 832mm
- Tags
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- Production Technology
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- Design Challenge
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- Research
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- Inspiration
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- Project Duration
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- Operation Flow
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- Team Members
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
